Gardner Denver DW 500 Drilling Rig
900hp Mechanical Drilling Rig for Sale in USA
Description
Gardner Denver DW 500 Used Mechanical Drilling Rig
11,000’ Drilling Capacity, 900 HP
Drawworks :
Gardner - Denver model DW - 500 drawworks.
Main drum grooved for 1 - 1/8" drill line and
powered by two (2) Caterpillar model C - 15
industrial engines.
Auxiliary brake : Parmac type V - 80 Hydromatic brake.
Mast :
Superior derrick services 136' - 0" clear height,
18' - 6" base, 600,000 lb. GNC 428,000 lb.
Static hook load mast with crown cluster consisting
of six (6) 42" Dia. sheaves and one (1) 55" dia.
Fastline sheave, all grooved for 1 - 1/8" wireline.
Substructure :
15 foot. box - on - box conventional substructure
with 450000 lb rotary capacity, 300,000 lb set back
capacity and 750,000 lb simultaneous rotary and
setback load.
Travelling equipment :
EMSCO 250 ton unitized hook/block combination.
Complete with five (5) 36" dia. sheaves.
King oil tools model 25MB - 14, 300 ton capacity swivel.
Rotary table :
Gardner - Denver model RT20 - 1/2" rotary table
chain driven off the drawworks rotary countershaft and
complete with Varco "MSPC" sold body pin drive
master bushing and type "20 - HDP" pin drive
Kelley bushing for 5 - 1/4" API hexagonal Kelly.
Well control equipment :
One 5 station Koomey type 80 BOP control unit
One (1) 2" x 4", 5,000 PSI WP choke manifold.
One (1) 36" OD atmospheric degasser.
United on a single Oilfield type skid.
Mud pumps :
Two (2) model F - 1000 Triplex mud pumps.
Powered by a Caterpillar model D399TA diesel engines.
Suctions charged by a 6" x 5", series 178 centrifugal pumps
and a Emsco style discharge pulsation dampeners.
Mud systems :
Tow (2) tank mud system of approximately 800 BBL
total capacity.
Shaker tank of approximately 400 BBLS with two (2)
6" x 5" series 250 centrifugal pumps powered by a
75 hp AC electric motor. One (1) derrick 12 cone
desilter, one (1) derrick 2 cone desander, one (1) derrick
vacuflo 500 degasser, one (1) O'Drill/MCM 15 hp
horizontal mud agitator. Two (2) vortex orbital 3000
shale shakers.
Suction tank of approximately 400 BBLS with two (2)
6" x 5" series 250 centrifugal pumps powered by a
75 hp AC electric motor. Four (4) O'Drill/MCM 15 hp
horizontal mud agitators. O'Drill 6" mud mixing
hopper complete with venturi.
Water tank :
One (1) 470 BBL capacity water tank complete
with two (2) 3" x 2" series 250 centrifugal
water pumps powered by a 20 hp AC electric motors.
Electrical system :
Two (2) 350 kW generators powered by two (2)
Caterpillar model C - 15 diesel engines. Complete
with switchgear and transdormers.
Auxilliary equipment :
One (1) retreiver wireline measuring unit complete
with 15,000 Ft. of 0.092" wireline.
One (1) air powered chain driven drill line spooler.
Compressed air system :
One (1) Quincey model "QSB - 40" air cooled
rotary screw packaged air compressor unit
delivering 165 CFM at 125 PSI and powered
by a 40 hp AC electric motor and
complete with modulation controls.
Complete with a 200 Ga. air receiver.
One (1) Quincey model "QR390 - 20" unitized
base mounted air compresor delivering 70 CFM
at 125 PSI and powered by a 20hp AC electric motor.
One (1) 500 Ga. air receiver mounted in the
substructure.
Rig site structures :
One (1) drill floor house at driller's position
One (1) crew change house parts house
One (1) fuel tank. |
 Drilling Rig 1.jpg "MD Cowan (Rig Tech RT 400B) Drilling Rig for Sale")
