OIME TBA 2000 Heli Rig for Sale
1500hp OIME TBA 2000 Heli Rig for Sale
Heli Rig for Sale
OIME TBA 2000 Drilling Rig for Sale
Helicopter Rig 1500hp for Sale in USA
Description :
Section A Hoisting Equipment
A1 Drawworks :
Make and Type : O.I.M.E. TBA 2000
Rated Capacity w/size DP : 16,000' With 5" DP
Drive type : Mechanical Compound with Four each 3408 Caterpillar diesel engines
Auxiliary Brake - Make, Model, Type : Parmac Model 342A Hydromatic Brake
Minimum Input HP : 2000 HP
Drum Size and Type : 26" diameter x 48" long with 1 1/4" Lebus grooving
Catworks Catheads :
Catworks - Rotary Drive Unit, with
Foster type 24 AH spinning cathead, and Foster type 37 AH breakout cathead
Hoisting Capacity in Low/with number lines : 750,000 lbs.
Crown Block Safety Device : Super Spool Valve American Standard PT 84105-16-16
Automatic Driller : Not available
A2 Mast :
Make and Type : Lee C. Moore
Dimensions : 136'x21'x20'
Maximum Rated Static Hook Load : 7,50,000
Hook Load Rating with number of lines : 10 lines 750,000
Adjustable Stabbing Board : Manual
Crown Block - Type : Lee C. Moore
Crown Block Sheaves Number and Size : Five each at 42" for 1 1/4" drilling line
Crown Block Fast Line Sheave and Size : 50" for 1 1/4" drilling line
Rating : 360 ton
Mast Racking Capacity, with 5" DP : 160 stands + BHA
Bumper Blocks under crown : Yes
Tubing Board Available : Not available
A3 Mast Substructure
Make and type : Lee C. Moore
Height under Rotary Beams : 17'
Nominal Height : 21'
Max. Set-back Load, (lbs.) : 400000 Lbs
Matting Boards : Not Available
A4 Travelling Assembly :
Block, Type and Rating : OilWell 400
Block Sheave Number, Size : Five each 42" sheaves for 1 1/4" drilling line
Hook, Type and Rating : N/A
Elevator Links, Size and Rating : 12' x 2 3/4" 350 ton
A5 Drilling Line :
Make : Union Wire Rope
Block Sheave Number, Size : Five each 42" sheaves for 1 1/4" drilling line
Hook, Type and Rating : N/A
Elevator Links, Size and Rating : 12' x 2 3/4" 350 ton
Section B Rotary Equipment
B1 Swivel
Manufacturer : Continental Emsco
Model : LB-400
Load Rating : 400 Ton
Kelly Cock : N/A
Quick Change Packing Assembly : Yes
Kelly Spinner Make/Type : 1 ea
Rotary Hose Length/Rating : 2 EA. 3 1/2" x 75' x 7,500 psi test
B2 Kelly : 1 ea
Type : Hex
Size : 5 1/4"
Length : 40 ft
B3 Rotary Table and Equipment
Make and Type : Ideco 27 1/2"
Opening : 27 1/2"
Drive : Drawworks Rotary Output utilizing the PO-218 twin disc clutch.
Maximum Input HP (at 125 rpm) : 20,000 ft/lbs. @ 125 rpm in third gear
Master Bushings : Varco MSPC pin drive split master bushing
Static Load Rating : 360 ton
Bowl Inserts for Casing : Number 1,2, and 3
Section C Pumping and High Pressure Discharge System
C1 Mud Pump
Number : No. 1
Type : H-700
Drive : 2 Ea. 3408 Engine compound
Maximum Input Horse Power per Pump : 800 HP
Liner Sizes Available : 6 and 5 1/2
Pulsation Dampeners (1/pump) : Hydril K-20 x 5.000 psi
Reset Relief Valves (1/pump) : Oteco 3" x 5.000 psi c/w flange conn.
Charging Pumps (1/pump) : 5" x 6"x 11"with 75 HP electrical motor
Suction Strainer : Yes
Discharge Strainer : Yes
C2 Mud Pump
Number : No. 2
Type : H-700
Drive : 3412 Engine
Maximum Input Horse Power per Pump : 800 HP
Liner Sizes Available : 6 and 5 1/2
Pulsation Dampeners (1/pump) : Hydril K-20 x 5.000 psi
Reset Relief Valves (1/pump) : Oteco 3" x 5.000 psi c/w flange conn.
Charging Pumps (1/pump) : 5" x 6"x 11"with 75 HP electrical motor
Suction Strainer : Yes
Discharge Strainer : Yes
C3 Mud Pump No. 3
Number : H-700
Type : 3412 Engine
Drive : 800 HP
Maximum Input Horse Power per Pump : 6 and 5 1/2
Liner Sizes Available : Hydril K-20 x 5.000 psi
Pulsation Dampeners (1/pump) : Oteco 3" x 5.000 psi c/w flange conn.
Reset Relief Valves (1/pump) : 5" x 6"x 11"with 75 HP electrical motor
Charging Pumps (1/pump) : Yes
Suction Strainer : Yes
Discharge Strainer
C4 Mud Pump No. 4
Number : H-700
Type : 3412 Engine
Drive : 800 HP
Maximum Input Horse Power per Pump : 6 and 5 1/2
Liner Sizes Available : Hydril K-20 x 5.000 psi
Pulsation Dampeners (1/pump) : Oteco 3" x 5.000 psi c/w flange conn.
Reset Relief Valves (1/pump) : 5" x 6"x 11"with 75 HP electrical motor
Charging Pumps (1/pump) : Yes
Suction Strainer : Yes
Discharge Strainer
C5 High Pressure Mud Lines
Discharge Line : 4" Fabricate in Colombia
Working Pressure : 5.000 Psi
Standpipe Manifold : 1x 4" x 5.000 PSI
Rotary Hose (1+1 spare) : 2 ea 3 1/2"x 75 ft x 5.000 psi working pressure
Standpipe (s) : Single
Section D Low Pressure Mud System
D1 Mud Mixing
Hoppers - Make & Type : 2 each Brandt MH-6WVT
Location : Above suction tank and premix tank
Mud Weight Capacity : 16.0 ppg
Low Pressure Pumps - Make & Type : 2 each Mission 5" x 6" x 14"
Drive : 75 HP electric motor
Covered Area : No Cover Area Available
Mixing Facilities : Mixing area is covered
D2 Active Mud Tanks
Shaker Tank 1, 2 & 3 (size & capacity) : 10' wide x 8' high x 12´ long 115 BLS EA with steel roofs
Intermediate Tank 4 & 5 & 6 (size & capacity) : 10' wide x 8' high x 12' long 115 BLS EA with steel roofs
Suction Tank 7 & 8 (size & capacity) : 10' wide x 8' high x 12' long 115 BLS EA with steel roofs
Mud Agitators (No. & HP) : 7 each 10 HP(To buy in Colombia to Brantd)
Mud Guns Number : 6 each
Pill Tank (capacity) : 1 EA 115 BLS
Sand Trap (capacity) : 115 barrel
Mud flumen and flow channels : Flow Trough available from shale pit to suction pit
D3 Reserve Mud Tank
Tank 1 (size & capacity) : 115 bbls
Tank 2 (size & capacity) : 115 bbls
Mud Agitators (No. & HP) : 2 each 10 HP
High Pressure Mud Guns : N/A
D4 Trip Tank
Capacity : 50 barrel
Level Indicator : E-mud system, with manuel gauge as back-up
Location : Separate isolated tank located in front of shale pit
Fill System : Independent 2 x 3 centrifugal driven by a 25 HP electric motor
D5 Shale Shaker 2nd Stage Linear :
Number : 3 each
Make and Type :Brandt King Cobra
Max flowrate (GPM) : 400 gallon per shaker depending on screens and mud properties
Screen sizes available : Operator's Account
D6 Mud Conditioner :
Make and type : Brandt King Cobra
No. of cones - sizes : 2 x 10" & 16 x 4"
Max flowrate (GPM) : 1000 GPM
Feed Pump - make and type : 2 Electrical Powered 5x6x11 Charge Pump
Drive Motor : 2 ea. 75 HP electrical motor
Section E Prime Movers / Transmission / Electric
E1 Diesel Engines :
Number : 4 each
Manufacturer : Caterpillar
Type : D3408 single Turbocharge
Continuous Output (HP) at RPM : 500 HP at 1800 RPM
Fuel Consumption : 6 gallon per hour
Noise Reduction (barriers,silencers,insulation) : Not Available
E2 Transmission : 4 Each
Manufacturer : Allison Transmision
Model : 6160 CLBT
Output Drive Type : Compound
E4 AC Distribution system
Manufacturer : Allen Bradley
Type : 2100 ACTO 8A 1BRXX
Rating : 600 KW
Input/Output : 480/220
Section F Auxiliaries, Drilling Rig Skidding
F1 Air Compressors
Number : 2 ea
Make and type : 2 ea Quincy 5120
Power Supply & Pressure : 30 HP 230/460 volt 3 phase electric motor
Air Receivers (Volume) : 120 gallon
Location : compressors skit
F2 Air Compressors
Number : 1 ea
Make and type : sullair
Power Supply & Pressure : 30 HP 230/460 volt 3 phase electric motor
Air Receivers (Volume) :120 gallon
Location : compressors skit
F3 Wireline Unit
Make & Type : Mathey
Wire Size : 0.092
Length : 15,000ft
Power : 15 HP electric motor
F4 Doghouse
Number : 2 EA
Size : 8' x 8' x 12'
Location : Rig Floor
Section G Blowout Prevention And Well Control Equipment
G1 Annular Type Preventers
Size : 13 5/8"
Make and Type : Shaffer
Pressure Rating : 5,000psi
Bottom Connection : 13 5/8" 5m clamp Connection (BX-160 Ring Gasket)
Top Connection : 13 5/8" 5m Clamp Connection (BX-160 Ring Gasket)
G2 Ram Type Preventers
Size : 13 5/8"
Pressure Rating : 5,000 psi
Make and type : 3 ea. Shaffer Type "" SL Single
Top Connection : 13 5/8" 5m Clamp Connection (BX-160 Ring Gasket)
Bottom Connection : 13 5/8" 5m Clamp Connection (BX-160 Ring Gasket)
Outlet size, location and connections : 4 1/16" 5m flange Connection (RX-39 Ring Gasket)
Connection on each side of ram bodies. : Yes
G3 Rams (Specify qty, for G2 )
13 3/8" Rams : Not Available
9 5/8" Rams : One Set
7" Rams : One Set
5" Rams : Two Set
3 1/2" Rams : One Set
Blind Rams : One Set
G4 Adapter / Mud Corss
Number : One each
Size : 13 5/8"
Pressure Rating : 5,000psi
Height : 20"
Bottom Connection : 13 5/8" 5m Clamp Connection (BX-160 Ring Gasket)
Top Connection : 13 5/8" 5m Clamp Connection (BX-160 Ring Gasket)
Outlets, Size : 2 each 4 1/16" 5m Flanged Connection (RX-39 Ring Gasket)
G5 Adapter / Spacer Spools
Number : One each
Size : 13 5/8" x 11"
Pressure Rating : 5M & 3M
Height : 13"
Bottom Connection : 11" 5m Flange Connection (RX-54 Ring Gasket)
Top Connection : 13 5/8" 5m ClampConnection (BX-160 Ring Gasket)
Outlets, Size : Not Available
G6 Pressure Unit and Control
Make and Type : Koomey Model T20120-3S
Capacity, Accumulator Pressure : 200gal, 3,000psi Accumulator Pressure
No. of Accumulator Bottles : 20 Bottles each 11gal
Main Control - location : 60 feet from well bore
no. of station : 5 each
no. of stations : 6 each
Accumulator Flowmeter : Not Available
Emergency Power : Air
Reservoir Capacity : 300 gallons
No. of Electric Pumps : One each Koomey Triplex pump powered by a 25 HP electric motor
No. of Air Pumps : 2 EA
G7 Choke Manifold
Pressure Rating : 5,000psi
Positive Choke, Make, Type, Size : Not Available
Adjustable Choke, Make, Type, : Cameron 2" 5m
Remote Controlled Chokes : Swaco
Remote Choke Controls Location : Rig Floor
Gate Valves with Flanges : 10 ea 3 1/8" 5M
Buffer Size and Pressure Rating : 8" OD and 10000psi
Automatic Choke Control : One each Swaco Panel on Rig Floor
Choke line hose : Yes 3 1/8" x 36 ft with flange
HCR Valve on Choke Line : Controlled at Koomey unit or Remote on rig floor
Section H Drilling Rig Floor Equipment
H1 Winches
Number : Two each
Make and Type : Ingersoll Rand
Line Size : 3/4"
Capacity :10,000 lbs
Location : Rig Floor
Section I Drilling/Coring String
Section J 3-1/2" Drilling String
Section K Parameters Recording/Indicating Equipment
K1 Weight Indicator
Make and Type : Atlas FS Martin Decker Type "E"
K2 Torque Indicator
Make and Type : MD Totco, Analog Martin Decker 0-500 Mounted in Driller's Console
K3 Rotary (RPM)
Make and Type : Totco 0-300
K4 Wireline Anchor
Make and Type : Matin Decker National Type "EB"
K5 Tong Torque Indicator
Make and Type : Martin Decker 0-25,000 ft/lbs
O1 Fuel Tanks : Rig Camp
Number : 1 each One each
Capacity : 360 barrels 120 barrels
Equipped with Fuel Level Sight Gauge and Tank Marked by Inch Calibration : Yes
Fuel Flow Meters : Not Available
Receiving Tank can be Isolated : Yes
O2 Water Tank
Number : 3 each
Capacity : 360 barrel each
Location : Rig Site
Flow Meters : Not Available
O3 D-5 Tractor
Make and Type : Caterpillar tipo D-5 Allenco Tractor
Description : Allenco type crene
Capacity : 10.000 pounds
Number : 2 |