Description :

2006 Gus Pech R-15 Brat-A-Sonic Drill Rig
Mileage – 11,956 
Hours – 11,830
Serial# 105GP133WDC24CXY506
GP# 24-400RS
Note : 8' x 8' ft deck that folds down when running the rig. 
Rod holder on the side of the rig that holds 20' ft rods or casing
Mounted on a 2006 M2 Freightliner 6x4 Truck
Diesel Engine : MBE4000-450 12.8L rated 450hp - SN: 460.933U0837213
Transmission : Eaton 16 speed manual with Chelsea HD PTO
Front and rear ABS air brake system
20,000# Front Axle, 46,000# 2 stage Tuftrac rear axle with 
Pusher axle @ 13,200# capacity
Note : All the Gus Pech specifications and detailed descriptions 
are viewable in the pictures on the spec sheets.
Note : The demand for sonic drilling in the industry to drill 
mostly environmental projects ranging from deep borings 
(300’ – 600’) with discreet water sampling, installation 
of CMT wells, monitoring wells ranging from 2” – 6” at 
depths reaching 500’ ft. The rig is also capable and has 
been used on projects where 30 – 45 - degree angle wells 
were installed.
Tooling & Sonic Heads available (cost extra) : 
About 450’ of 10-3/4” x 10’ H90 Sonic Casing (270’ ft never used), 
several H90 drive heads for 5-7/8”, 7-5/8”, 8-5/8”, 9-5/8” and 
10-3/4” casing sizes. Overshots and taps for all sizes, core bits, 
casing shoes and some core barrels. We can sell this lot separately 
or include it in a package deal. 
We can offer 3 complete Dietrich sonic heads and parts and pieces 
to assemble maybe 2 more sonic heads (each head cost extra). 

Location : USA

Description :

2006 Gus Pech R-15 Brat-A-Sonic Drill Rig
Mileage – 11,956 
Hours – 11,830
Serial# 105GP133WDC24CXY506
GP# 24-400RS
Note : 8' x 8' ft deck that folds down when running the rig. 
Rod holder on the side of the rig that holds 20' ft rods or casing
Mounted on a 2006 M2 Freightliner 6x4 Truck
Diesel Engine : MBE4000-450 12.8L rated 450hp - SN: 460.933U0837213
Transmission : Eaton 16 speed manual with Chelsea HD PTO
Front and rear ABS air brake system
20,000# Front Axle, 46,000# 2 stage Tuftrac rear axle with 
Pusher axle @ 13,200# capacity
Note : All the Gus Pech specifications and detailed descriptions 
are viewable in the pictures on the spec sheets.
Note : The demand for sonic drilling in the industry to drill 
mostly environmental projects ranging from deep borings 
(300’ – 600’) with discreet water sampling, installation 
of CMT wells, monitoring wells ranging from 2” – 6” at 
depths reaching 500’ ft. The rig is also capable and has 
been used on projects where 30 – 45 - degree angle wells 
were installed.
Tooling & Sonic Heads available (cost extra) : 
About 450’ of 10-3/4” x 10’ H90 Sonic Casing (270’ ft never used), 
several H90 drive heads for 5-7/8”, 7-5/8”, 8-5/8”, 9-5/8” and 
10-3/4” casing sizes. Overshots and taps for all sizes, core bits, 
casing shoes and some core barrels. We can sell this lot separately 
or include it in a package deal. 
We can offer 3 complete Dietrich sonic heads and parts and pieces 
to assemble maybe 2 more sonic heads (each head cost extra). 

Location : USA