Worldrigs ID: WR1102
Description :

Worldrigs ID: WR1074
Load Cells, Load Shackles and Running Line Monitors
Capacity from 2 Ton up to 1250 Ton.
Comes with calibration certificate.

Worldrigs ID: WR383

Description
Flex Joint 18-3/4" 2 KSI 10K Flange. SN 544

Worldrigs ID: WR1136
Description :

Manual, airdriven or electric lifting and pulling winches including associated 
equipment for rental.
Capacity from 500 kg to 200 ton. 

Worldrigs ID: WR749
Description

2005 Hurricane 6T 276B / 1000 Air Booster
Caterpillar 3126B Diesel Engine
350 PSI
1000 PSI discharge
2400 CFM capacity
Electric start
Radiators
Heat exchangers
Scrubber tank
7,573 hours
Skid mounted

Worldrigs ID: WR387

Description
Make : Le Tourneau
Model : LDW1000K
YOM : 2011

Measurements
Dimensions : 6.6m x(l) x 3.9m(w)x 2.6m(h)
Weight  : 33.4 Tonnes

Worldrigs ID: WR384

Description
AnnularType DL 18-3/4" 10K, flanged CX18 Gasket
Assy No. 2163588-41

New Unused
Manufacture Date 04-2014
Certified until 2019

Worldrigs ID: WR740
Description

Vetco H4 13 5/8" 15000PSI
Dimensions: 1.0 x .0 x 1.2 each
Weight: 5 Te each

Worldrigs ID: WR919

Worldrigs ID: WR903
Description :

Model : TDS-11SA/500T/800HP-50HZ
Brand : NOV

Technical Parameter
Rated lifting capacity : 500T
Electric motor : 800HP AC(2x400HP)
Working pressure : 7500 Psi
Continuous rated torque : 37500 LB ft
Maximum speed level : 228 RPM

Worldrigs ID: WR1071
Description :

Adjustable spreader beams - WLL up to 400 Ton
Span from 2 meter up to 25 meter (0.5 meter steps)

c/c padeyes : From - 2 meter to - 25.5 meter
2 x top padeyes for 300 T shackles
2 x bottom padeyes for 200 T shackles
Comes with certificate and user instructions.
DNV GL type approved
24mm x 90mm grade 8.8 HT galvanized bolts, nuts & washers
Slings and shackles can be supplied with spreader beam.

Worldrigs ID: WR736
Description

GE Vetco, Riser Adapter, MR6E - 18-3/4" 5K
Size: 18-3/4"
Pressure: 5K
YOM: 2015

Worldrigs ID: WR1050
Description :

Fairleads for deck installation to guide wire, rope, cable or umbillical

Worldrigs ID: WR458

Description :

1 Pair of Cameron 28" Super Shear Bonnets. 18 3/4" 15M 'TL' Externally
Ported W/625 Inlay In Open/Close Ports, Connecting Rod Seal Area And
Bonnet Seal Groove Area.

YOM : 2013
Dimensions : 2000 x 3.2 x 1.5
Weight : 8 Te
Condition : New
 

Worldrigs ID: WR1025
Description :

Maintenance :
Maintenance was performed during the operation with own personnel
according tothe manufacturers guidelines.
The ship loaders began operation in March 2013 and ended operation
in April 2020.
These Shiploaders totalized 18,226.912 tons of coal. The loaders
made 218 shipments and their operating time was 8.873 hours.
During this period, preventive and corrective maintenance was performed.

Preventive maintenance was carried out based on guidelines with the
following nomenclature that states their periodicity:

PM1, Maintenance during loading.
PM2, Maintenance after loading
PM3; Monthly maintenance of electrical rooms and electrical panels on site.
PM5; Semi-annual maintenance to shiploaders
PM6; Annual maintenance to shiploaders.
PM6 Engines; Annual maintenance to electric motors of the shiploaderss.
PM6 Electrical rooms and boards; Annual maintenance to all the boards and
electrical rooms of shiploaders

Worldrigs ID: WR1070

Adjustable Spreader Beams @ 20º top sling
1 x 12.5M, capacity up to 24T
1 x 14M, capacity 57 T
1 x 11M, capacity up to 100T
2 x 24M, capacity 198T
2 x 14.5M, capacity 250T
2 x 24M, capacity 319 T
2 x 22M, capacity 400T

Worldrigs ID: WR463

Description :

Aanestad Hydraulic Jack Capacity: 250 Tons on the Piston Rod Side.
Stroke: 900mm.
Skidding Beam Dimensions: 700mm(w) c 60mm Upperand 75mm Lower Flange.
Skidding Beam Slots: 152x51mm (610mm and 255mm between slots).
Hydraulic Jacks are supplied with Grippers.

Specifics
Make : Aanestad
Model No : 5980
Quantity 1

Measurements
YOM : 2011
Weight : 11.2T
Condition : New and Unused
Documents : Y

Location : UK

Worldrigs ID: WR1086

Simply turn the wheel to lift up or lower down

Features:
Atex compliant for zone 1
No scaffolding required
Easy to operate
Battery and power free
Wind resistant up to 3 degrees (maximum wind force 12.5m/s)
Professional training can be provided.

Maximum working height : 4.20m
Maximum platform height : 2.20m
Basket dimensions : 0.85x0.64m
Working footprint : 1.28mx0.95m
Safe working load : 150kg
Maximum manual force : 200N
Maximum operational gradient : 3̊
Maximum wind force (Applies to both): 9mph
Maximum wheel force : 165kg
Maximum castor point load : 165kg(1.62kN)
Sound pressure level : Less than 70Dba
Length : 1.28m
Width : 0.95m
Height : 1.95m
Weight : 354kg

Worldrigs ID: WR896
Description :

Technical Parameter
Model : 3508B/50HZ
Output Power : 900HP
Maximum Speed : 1200 rpm
Manufacturer : CAT
Quantity : 1 set
Manufacturing Date : 2012

Worldrigs ID: WR743
Description

2006 ACEC Air Foam Unit Combination Air Booster & Compressor on Trailer:
Joy WB-12 Air Booster
7" Stroke
15,000# Rod Load
CAT C-15 Diesel Engine
909 Hours Showing on Meter
Electric Start
Manuel Transmission
Scrubbers
Sullair 1150 cfm / 350 psi Air Compressor
CAT C-15 Diesel Engine
926 Hours Showing on Meter
Electric Start
KERR XP 3300 Triplex Pump
CAT 3054 4 Cylinder Diesel Engine
841 Hours Showing on Meter
(2) Texstream High Pressure Chemical Pumps
5'L X 5'H Dual-Comp Mixing Tank
Diesel Tank
Master Control Panel with Nuflow Flow Analyzer
Mounted on a 2007 Lufkin PM-DF Trailer
Dimensions 8'W X 48'L
T/A Step Deck Trailer - 255/70R22.5 Tires
(2) Hydraulic Leveling Jacks all

Worldrigs ID: WR897
Description :

Technical Parameter
Model : TAD1343GE/50HZ
Output Power : 300KW/375KVA
Maximum Speed : 356KW
Manufacturer : VOLVO
Quantity : 2 sets
Manufacturing Date : 2011

Worldrigs ID: WR900
Description :

Technical Parameter
Model : G12V190PZL1-3/O
Rated power : 1210KW
Rated Speed : 1000 r/min
Rated Capacity : 1750kVA
Rated Frequency : 50Hz
Manufacturer : Jinan Diesel Engine Company
Quantity : 1 set

Worldrigs ID: WR732
Description

Mud Tank
Skid mounted
Tank dims 40' L x 96" W x 83" H
Over all dims 43' L x 96" W x 87" H
Angle and lip on top to set shakers

Worldrigs ID: WR385

Description
Annular 18-3/4" 10K Type D -
Assembled 11-2013
 

Worldrigs ID: WR438

Description

Riser Adapter PN NO-DB-AD-0791

Measurements

Dimensions 1.5 x 1.5 x 2 H
Weight 3Te

 

Worldrigs ID: WR895
Description :

Technical Parameter
Model : 3508B/50HZ
Output Power : 900HP
Maximum Speed : 1200 rpm
Manufacturer : CAT
Quantity : 1 set
Manufacturing Date : 2013

Worldrigs ID: WR1114
Description :

Transport trailers for heavy load, airdriven or manual, capacity up to 50 ton

Worldrigs ID: WR396

General
YOM : 2013
Model OSB 240 (M).

Specifications
Dimensions : 2.7 x 1.6 x 2.8
Weight : 4030 Kg
Rated Load 280Kg.

Worldrigs ID: WR1139
Description :

Wiresling, pennants, china fingers, grommets and fibre rope in different sizes.

Worldrigs ID: WR1140
Description :

This gripper machine are special designed to hold wire or sheathed 
spiral strand up to 167 mm diameter.
The length and shape of the interchangeable inserts are calculated and 
designed to limit the radial pressure to 25 N/mm2(3550 psi). The inserts 
have a smooth surface and a large radius. 
Wire or cable can be removed by the top (by opening the gripper) with 
easy handling, but cable socket will not be able to pass through the gripper. 
The machine will act as a linear winch in conjunction with deck winch. 

Characteristics:

Line pull capability : 100 Tons
Contact length : 1500mm
Radial pressure : 25 N/mm²(at 100 tons)
Opening type : Yes
Strand diameter : Up to 167mm
Dimensions L x W x H(mm) : 2540 x 1114 x 547
Weight : 3150kg

Worldrigs ID: WR424
Specifications
Generator (Units : US Metric)
Rating : 2000 ekW (2500 kVA) Standby
Frequency : 50/60 Hz
Voltage :     230 - 480 V
Prime Rating : 1825 ekW (2281 kVA)

Engine
Engine : 3516 Tier II ATAAC
Fuel : Diesel

Dimensions
Width : 96.0 in
Height : 114.0 in
Length : 480.0 in
Weight : 93000.0 lb

Description for XQ2000 Standard Equipment
3516 Tier II ATAAC Diesel Engine
- Reliable, rugged, durable design
- Four-stroke-cycle diesel engine combines durability with minimum
weight while providing dependability and economy

SR4B Generator
- Designed to match performance and output characteristics of diesel engines
- Multi-voltage, dual frequency, brushless, three phase, 12-lead design
- Permanent Magnet excited (PMG)
- Digital Voltage Regulator
- Space Heater
- Class H insulation operating at Class F temperature for extended life
- Winding temperature detectors

40' ISO High Cube Container
- 3-axle 40' ISO container chassis
- Sound attenuated air intake louvers
- Shore connection via distribution block
- External drain access to standard fluids (coolant and oil)
- CSC Certified

Reduced Environmental Impact
- Sound attenuated for low noise operation
- 110% spill containment for cooland and oil

Link Board Assembly
- Set mounted generator multi-voltage adjust plate
- Voltage nodes 208V, 240V, 400V, & 480V wye configuration

Caterpillar Switchgear
- Provides single unit and/or utility paralleling components. Standby, Load Sense/Load Demand,
Import, Export, and Base Load modes.

Worldrigs ID: WR755
General
Year Re-Built : 2018
Upgrade : 2018 (Overhaul)
ABS Class Notations : A1, Mobile Offshore Drilling Unit (MODU)
Last Inspection (ABS) : January 2019

Main Dimensions
Length : 247 ft -7 in; Breadth : 227 ft -5 in; Depth : 26 ft
Legs : 3 x 410 ft Square Truss
Leg Spacing : Longitudinal leg centers 129 ft; transverse leg centers 142 ft
Spud cans : 46 ft diameter x 24 ft high
Cantilever : Slot dimensions 41 ft x 50 ft
Helideck : S-61; diameter 70 ft

Operational Parameters
Water Depth : 300 ft (17 ft - 300 ft)
Maximum Drilling Depth : 20.000 ft with 5 in DP
Available length below hull including 5 ft margin Air Gap : 80 ft
Transit Speed : 5 knots
Survival Conditions –
Criteria Design; wind : 100 Knots; waves period: 13 sec; wave height: 44 ft
Jacking and skidding system : Marathon LeTourneau AC electric rack and pinion, 90 ft/HR

Drilling Equipment
Derrick : Dreco 170 ft x 30 ft x 30 ft x 1.500.000 lbs.
Cantilever Load : 1.310.000 lbs.
Drawworks : 1320 x UE 2000HP National Oilwell; wire 1 ½”. Electric brake: model 7838 Baylor
Rotary Table : model C-375 National Oilwell 37 ½", driven by 1 D79 EMD motor
Top Drive : model TDS-4H Varco BJ 650 TON, with Pipe Handler model PH-85
Travelling : Continental Emsco 760H 650 TON
Crown Block : National OilWell 760FA
Mud Pumps : 2 National Oilwell modelo 12-P-160 Triplex - 5000 psi. Stand pipe 5 in x 5000 psi
Main Power : 3 EMD 16-645-E8 Engines 6600 HP, generators AB20-N6 x 1,575 kW 600 V
Emergency Power : 1 Cat 3412-TA 719 HP Diesel engine
Cementing Unit : 2 electric triplex pumps. 15000 PSI, 14 BPM
Control System : air/electric powered
Choke and Kill Manifold : 3-1/16" x 10000 psi x 2 HCR & 2 manual

Capacities
Liquid Mud : 1605 bbls
Bulk Mud / Cement : 6240 cu.ft
Sacks : 2500 sacks
Drill Water : 10540 bbls
Potable Water : 1294 bbls
Fuel Oil : 4727 bbls
Base Oil : 563 bbls
Preload Tanks (include combination tanks) : 15542 kips

Mud Equipment
Mud cleaner (4) MI Swaco; Desilter (1) Mi Swaco; Degaser, Rig Vaccum MI Swaco..

Accommodations
88 berths;
Main offices, auxiliary offices;
Mess and galley, meeting room;
Recreation room and gym,
Medical office with observation room and bedroom with eight beds for quarantine cases
Watermaker : model NH75463+APC, FCI
Sewage Treatment : model RF 4000-M; Red Fox

Security Systems
Communication and Navigation System GMDSS
Smoke and Heat detection System
CO2 Extinguishing System;
Water Extinguishing System with Raw Water System.; Portable extinguishing equipment
Toxic Gas (H2S) and Combustible Gas (CH4) Detection System
General Alarm System
Emergency Shutdown System
CCTV System
One Lifeboat (63 Man Cap.),
Two survival capsules (28 Man Cap. each),
Four Liferafts (25 Man Cap. each)

Worldrigs ID: WR1138
Description :

Worldrigs ID: WR894
Description :

Technical Parameter
Model : 60Hz
Output Power : 500KW
Maximum Speed : 1800 rpm
Manufacturer : CAT
Quantity : 2 sets
Manufacturing Date : 2013

Worldrigs ID: WR1119
Description :

Snubbing Jack
This jack assembly is designed to push (snub) and pull (lift) pipe into
and out of a dead/pressurized wellhead utilizing three (3) hydraulically
operated 170k, 7-1/16” slip bowls. This assembly is designed to be used
as both a Stand-Alone snubbing unit, and a Rig Assist snubbing unit.
This assembly is designed to work in conjunction with the Annular BOP
and 2 x BOP stripping rams. This assembly will consist of the
following components :

Jack Plate
Passive Rotary
Traveling Snubbing Slip Bowls
Control Panel(s)
Upper Work Platform
Stationary Snubbing Slip Bowls
Stationary Heavy Slip Bowls
Jack Cylinders
Annular Preventor
Upper stripping Ram
Bleed off/ Equalize Spool
Bleed off/Equalize Plug Valves (1” ID)
Lower Stripping Ram BOP

Jack base
This assembly is designed so that the Annular can be split for
changing elements in the Annular.
This assembly will be the main support structure for the hydraulic
cylinders, workbasket, Annular BOP and Stationary Snubbing Slip bowl.
The jack base will have one (1) manually extendable ladder assembly

Passive Rotary System
The primary design of the rotary is to allow the snubbing unit to
perform drilling/milling operations in both snub/lift situations.
This Passive Rotary system works in conjunction with a power swivel
if required.
All hydraulic hose connections are integrated quick disconnector type.
The passive rotary allows the unit the ability to set tools requiring
rotation in pipe heavy or pipe light mode.

Jack Cylinders
The two (2) jack cylinders will be custom made and have a 6” (15.24cm)
bore x 4” (10.16cm) rod x 10ft (3.05m) stroke.
The cylinders can produce a combined push (snub) force of 85,500 lbs.
(38,555 kg.) and a combined pull (lift) force of 170,000 lbs. (77,110 kg.)
These assemblies will be mounted to the jack base assembly.
Anti-wear bands on packing glands and pistons.
3,000 Psi maximum working pressure
Hydraulic braking system for both lift and snub.

Jack cylinder control valve
This valve assembly will consist of a “Husco” 6400 pilot operated split
spool control valve which controls the up and down motion of the jack
cylinders.
This valve will be plumbed to include a high speed (regen)/low speed
circuit on the up stroke of the jack cylinders. This allows the operator
to run the jack cylinders at a higher speed on the up stroke.
The regen selector will be in the workbasket under the operators console.
The hydraulic flow lines from the Husco valve to the jack cylinders
will be steel piping. All other hydraulic flow lines on the snubbing
jack assembly will be hydraulic hoses.
Counterbalance valves in up and down control circuits to control over
running loads.
The split spool valve assembly will be mounted to the jack base assembly.
The “Husco” 5000 A62 pilot operated control valve will be mounted in the
operator panel.

2-1/2-Gallon Annular BOP Accumulator (Surge bottle)
The purpose of this assembly is to prevent overpressure of the Annular BOP
control circuit. The nitrogen charged accumulator will compress when an upset
on a pipe joint passes through the Annular BOP.
This assembly mounts on the jack base.
Slip bowls
5.5/225K High Capacity Slip Bowl

Specifications
Rated load : 225,000 lbs.
Designed and tested in compliance with API-8C, with factor-of-safety
rating of 1.5:1
Cast carriers with keyway slots
Full opening
Overall dimensions : 22” wide x 21” length x 18-3/8” high
Weight : approx. 550 lbs. less inserts
Traveling bowl mount pattern : 1-1/8” tie rod hole pattern: 4 ea.
equally spaced on 14” DBC (approx. 9.9” x 9.9”)
Gate pin dims : 13-1/8” center to center of gate pins
Insert max : 5-1/2” diameter
Tie rod size : 1-1/8” diameter
Gate opening : 6-5/8”
Max open dia. less inserts : 8-3/8”
Normal operating pressure : 600-1500 psi
Cross port relief valve
Hose connections : 3/4” quick disconnects

Work baskets
There is one (1) work basket mounted on this unit.
The upper basket is the primary operational basket.
This assembly will be a box tubing structure.
The workbasket floor will be steel grating.
The workbasket will include the following items :
fall arrest mounting points, hand tool hangers, operators toolbox,
TIW storage post. Tong backup post
This assembly mounts to the jack base assembly.

Operators Control Panel
The Operators control panel is made of stainless steel,
and the function of the valves and gauges, are engraved onto
the panel in English. The panel is equipped with a cover to
prevent contamination from dust and water.

This control panel will include the following components :
1x Gauges for weight indication – 1 x gauge will read pipe heavy
and 1 x gauge will read pipe light;
System pressure gauge
Wellbore pressure gauge
Slip pressure gauge
Annular BOP pressure gauge
BOP pressure gauge
Husco control valve plumbed with regen circuit for controlling the
jack up/down function
Jack pressure adjust valve for adjusting jack pressure
3-bank Slip bowl control valve for controlling the Slip bowl
open/close function
8-bank control valve for controlling Annular BOP and BOP rams
open/close & equalize and bleed off functions.
Slip pressure adjust valve
Annular BOP pressure adjust valve
Regen selector valve for jack selecting jack speeds
Engine throttle control valve
Air outlet fitting for pneumatic tools under the control panel
Engine kill control valve.

Annular BOP
7 1/16” 5k BOP Snubbing stripping stack
1 x Annular Blowout Preventer, Annular Type “S”, 7-1/16” 5,000
psi (R-46) studded top x 7-1/16” 5,000 psi (R-46) flanged bottom,
complete with seal kit and nitrile element. API 16a monogrammed
to the latest edition, H2S trim, temp: t-20.
Stripping Ram : 2 x Blowout preventer, Cameron (or equivalent)
“U” type, hydraulic operated/manual locks, 7-1/16” 5,000 PSI flange
top x 7-1/16” 5,000 psi flanged bottom, standard bonnets,
(dressed with 2 3/8” ram blocks), API 16a monogrammed, H2S trim,
temp: t-20
1 x Equalize and Bleed off spool, complete with hydraulic plug valves,
5,000 psi, 7-1/16” 5,000 (R46) flanged top x 7-1/16” 5,000 (R46)
flanged bottom.

Snubbing spreader bar and lifting cables
1 x set of vertical lift spreader bar & lifting chains
to be supplied
This assembly is picked up by a crane or rig and used to
lift the snubbing jack assembly onto the wellhead.

Transportation requirements
The unit including jack system, work baskets, gin pole, BOP/EQ/Bleed off
system is designed and manufactured as integrated and in one lift for
 rig up and rig down.
To be transported on custom truck.

Hose kit
Hose kit assembly – this assembly includes all the hoses required to
operate all the functions of the jack assembly.
Quick disconnects are on one end of the hoses. The hose kit assembly
can be disconnected from the power-pack.
The hydraulic hoses are rated to maximum hydraulic working pressure.

Worldrigs ID: WR898
Description :

Technical Parameter
Model : V-300GF-3/50HZ
Output Power : 300KW/375KVA
Maximum Speed : 356KW
Manufacturer : VOLVO
Quantity : 1 set
Manufacturing Date : 2012

Worldrigs ID: WR1005

Worldrigs ID: WR751
Description

2004 Hurricane 6T 276B / 1000 Air Booster
Caterpillar 3126B Diesel Engine
350 PSI
1000 PSI discharge
2400 CFM capacity
Electric start
Radiators
Heat exchangers
6,528 hours
Scrubber tank

Worldrigs ID: WR381

Specifications
Cameron HC Connector 18-3/4" 15K.
c/w CX18 Gasket profile, Assy No. 615626-23.
Type c/c HC.
Serial No. 113039114-01.
S/O 3033601. 
Mfg Date : 10/2014.

Worldrigs ID: WR718
Description

Used - T4 Style Drill Pipe (25' x 4-1/2" x 2-7/8") 2-7/8" IF (Internal Flush) thread pin & box
20 Pipes in stock

Worldrigs ID: WR1137
Description :

Manual, airdriven or electric lifting and pulling winches including associated 
equipment for rental.
Capacity from 500 kg to 200 ton. 

Worldrigs ID: WR714
Description

1000' ft of 6" ID of Flanged Drill Pipe
Near new condition

Worldrigs ID: WR1098
Description :

50 Ton capacity lifting tool for pulling of piles, with ROV operated locking.

Worldrigs ID: WR1003

Description :

Airdriven, Electric, Hydraulic and Manual hoists and trolleys, capacity 0,5 – 100 T.
Standard and lowhead room.

Worldrigs ID: WR1047
Tool & Equipment containers - Storage containers - Office containers -
Standard ISO containers and DNV 2.7-1

Worldrigs ID: WR902
Model : TDS-11SA500T800HP-60HZ
Brand : NOV

Technical Parameter
Rated lifting capacity : 500T
Electric motor : 800HP AC(2x400HP)
Working pressure : 7500 Psi
Continuous rated torque : 37500 LB ft
Maximum speed level : 228 RPM

Worldrigs ID: WR1111

Description :

This cable push / pull system provide supplementary force when laying
heavy cables.
Usable in serial combination with one-man operation or as stand alone unit.
Optimum and gentle transmission of power to the cable.
Suitable for narrow trenches.
Cable winch not neccessary.
Transport chains are equipped with wear resistant plastic studs.
 
Electric driven
Drive power : 1,5 kW
Pushing force : Approx 700 kg
Pushing speed : 0 – 10 m/min
Cable diameter : 30 – 150 mm
Weight each : 185 kg
L 1700mm x W 550mm x H 9830mm

Worldrigs ID: WR724
Description

Used Gardner Denver PZ-8 Triplex Mud Pump
8" stroke
750 HP
Steel billet fluid end
Pump has alloy steel modular fluid cylinders with 6 1/2" liners
Liner wash system, API 7 Valve pots
Gear reducer, discharge pulsation dampener
suction connection
FF discharge connection
4.5 gear ratio.

Worldrigs ID: WR735
Description

Riser Adapter, 21". MR-6C Pin W/BX-163
Dimensions: 1.1 x 1.1 x 2.1
Weight: 1.5 Te

Worldrigs ID: WR722
Ideco T-1000 Triplex Mud Pump
7" x 10" liners with FSFE
Gears Good,
HYDRIL K-20-5000 Pulsation Dampener
Skid Mounted
Dimensions: 14' x 8' 6" x 9' and weight 35,000 LBS
Note: No Engine installed, but a 1000-1200 HP diesel engine can be installed at an extra cost to make it complete

Worldrigs ID: WR437

Description

Unused Collect Connector Assy 18-3/4" 10K.
Model 70 PN 648695-01.
NBA 625 AX Clamp Hub BTM NBA 625
Lined BX-164 STTD Top, With Manual Overrides
Secondary Open Port w/SS Tubing
W/ TBG Hanger Orientation Slot

Measurements :
YOM : 2013
Dimensions : 1.8 x .8 x 2.0
Weight : 10 Te

Worldrigs ID: WR1141
Description :

Cable drum tensioner provide up to 15 Ton back tension also with
constant tension function.

Specifications 15 T drum tensioner :
Back tension : 1 – 15 Ton
Max line speed : 10 m/min
Drum diameter : 3 meter
Dimensions Wx Lx H : 2.2m x 3.7m x 3.95m
Weight : 12 Ton

Track tensioners provide up to 150 Ton back tension for installation or
recovery of flexibles cables, umbilicals and steel pipe products.

Tracks fitted with V shaped pads operate by gripping the product
between the opposing track carriages with failsafe hydraulic cylinders.

Specifications 150 T track tensioner :
Back tension : 15 – 150 Ton
Max line speed : 0-500 m/hr
Track contact length : 5.5 meter
Nominal squeeze/m : 1500 Ton (4 x 375 Ton)
Dimensions W x L x H : 4.5m x 8.5m x 5.1m
Weight : 98 Ton

Worldrigs ID: WR459
Description :

H4 HD Connector. 18 3/4". 15K. 15K Flangew Up With Inconel Lined CX-18 Groove.
Weight : 16 Te

Worldrigs ID: WR972
Description :

14 barges are in our rental fleet.
Two sizes: Tension Barges = 14,5 x 20 x 3 meter
and Anchor Pontoons = 12 x 12 x 2 meter.
One TB barge comes with lifting point and can be
ballasted as test weight from 150 to 900 ton.

Worldrigs ID: WR390

Description
New and unused Outreach Casing Stabbing Maintenance Basket.
Model OSB 140M.
Maximum Outreach 14.5m.
Lifting Capacity 280kg.

2011 Built
Weight : 3340
 

Worldrigs ID: WR382

Description
4 x BOP Fail Safe Valves

Worldrigs ID: WR1126
Description :

life boat testing kits can be used to apply an evenly distributed load
to a lifeboat or any other object that has to be proof loaded.

Depending upon the required proof load, a number of water bags have to be
spread evenly in the life boat and connected to the manifold.

The bags have to be filled to their maximum capacity, this way you can be
sure of the total weight, as the manufacturer guarantees a filled weight
of 375 kg with a tolerance of 1%.

These specially designed Life boat testing bags of 375kg each are part
of a complete life boat testing set. A remote system with a manifold
and filling hoses, allows proof load testing to be conducted safely,
without entering the craft in the dangerous overload situation.

The life boat proof load testing set can also be used for load testing
of gangways and small bridges.

One LB kit Contains :
12 Waterbags 375kg
1 Manifold
1 Transport case
1 Emptying airpump
1 set of hoses

Technical Data :
Material PVC coated Polyster Fibre
Coupling 1" Camlock
Weight (filled) : 375kg
Weight (empty) : 9kg
Length : 245cm
Diameter : 44cm

Worldrigs ID: WR1080

Description :

MudMat is a heavy-duty polyurethane (PU) Subsea
Protection & Support Mat developed for use offshore and
onshore.
The mat can be utilised as subsea support, landing and
positioning device or as seabed, pipeline and cable
protection. Design is based on offshore experience and
the requirement for a multi- purpose flexible mat.
Certified lifting slings have been integrated in the
MudMat® during fabrication resulting in the production of
a mat that is robust and easy to handle. MudMat® is
available in several standard sizes and weights. The
MudMat® is bundled for easy storage and transport.
MudMat® Reinforced has been developed for special
purposes and is equipped with moulded-in steel
reinforcement which ensures increased stiffness, weight
and robustness. It will also provide increased stability of
the product during subsea operations.
MudMat® has an expected life time of minimum 20 years

Type	Dimension(mm)	Mass in air/seawater(Kg)		Bundle size
		MudMat®Standard	MudMat®Reinforced	LxWxH(cm)
MudMat®30	6000x5000x30	674/94	730/149	614x60x40
MudMat®18	3600x5000x30	410/57	445/91	367x60x40
MudMat®9	3600x2600x30	220/31	238/49	367x60x20
MudMat®4	2400x1600x30	91/13	99/20	243x30x15

Worldrigs ID: WR460

Description

2 x Shaffer Bonnet Assemblies 10K 18-3/4"

Measurements
Dimensions : 1.9 x 1.6 x 2.0

Weight : 2.5Te ea

Location : UK
 

Worldrigs ID: WR1103
Description :

Standard shackles, Wide Body, Super shackles, D-type and specials with capacity up to 2000 T

Worldrigs ID: WR742
Description

2004 Ingersoll-Rand 1170 CFM / 350 PSI Air Compressor
Has an unused 2005 Air End Installed with 0 hours
Powered by a Caterpillar C-15 Diesel Engine
525 Hoursepower at 1,800 RPM'S
Hour Meter Shows 14,904
Runs Good
Skid Mounted

Worldrigs ID: WR1125
Description :

A wide range of water bags with single units up to 100 Tonne.
The water weights have a space saving design and are used for
testing of cranes, winches or other equipment.
Shackles, master link and fluid transfer fittings comes with each waterbag.
Loadcells can also be supplied to check the actual weight.
Water bags are foldable for easy storage and transportation.

Worldrigs ID: WR1123

Description :

Turnbuckles used to shorten or expand wirerope or chain assemblies

Worldrigs ID: WR975

Description :

Type :
1465 (Electrical) Special Designed Hose Reel: Heavy Duty Steel
Construction (M2-ENG 0627)

Description special designed hose reel:
Heavy-duty Steel Construction with 250μm offshore epoxy
coating, suitable to handle 220m 3” ϐloating hose assemblies.
Piping, Swivel, Bolts & Nuts are made of Stainless Steel316.

Retraction:
With Electric (400V, 50Hz) motor direct to shaft driven
Planetary gear box with Marine break. Included control box
with Wireless frequency-controlled speed control panel.

Estimated dimensions footprint mm:
W: 3800, D: 1700, H: 2200. Weight 4100 Kgs

Description hose:
220m assembly ϐloating Rig supply hard wall hose for marine fuel.
Included Marine Break-Away coupling and DDC Hose Unit 3” in
Stainless Steel316

Condition: Brand New in original packing and never used

Location : Abu Dhabi, UAE

Worldrigs ID: WR970

Worldrigs ID: WR978
Description :

50 and 100 Ton towing brackets

Worldrigs ID: WR744
Description

Ingersoll-Rand 900 cfm / 350 psi Air Compressor
Air end rebuilt 2014
CAT 3406 Diesel Engine
Air start radiator
Gauge panel
Wheel cooler
Mounted on a Skid 8 feet wide and 30 feet long

Worldrigs ID: WR731
Description

Mud Tank
Skid mounted
Tank dims 40' L x 96" W x 83" H
Over all dims 43' L x 96" W x 87" H
Angle and lip on top to set shakers

Worldrigs ID: WR980
Description :

20.000 meter offshore quality K4 / R4 anchor chain and components,
73, 82 and 120 mm diameter.

Worldrigs ID: WR969

 

Description :

Bullets Technical Data

 

2) Bullet Size : ID 8m x 61m TL/TL ; Quantity : 4 bullets
3) Shell / Hemi head thickness & material = 38mm (Shell) & 25mm (Head) SA 537 cl 2
4) Design Pressure (Internal / External) = 19 / FV barg
5) Design Temperature (Max / Min) = 50 / -40 deg C
6) PWHT : Yes
7) Capacity = 3,300 m3 per bullet
8) Weight
Empty Weight = 612 MT
Operating Weight = 2,308 MT
Full of Water Weight = 3,950 MT

Worldrigs ID: WR719
Description

New T4 Style Drill Pipe (25' x 4-1/2" x 3-1/2") 3-1/2" API Regular thread pin & box
34 Pipes in stock
Allow 4-5 weeks lead time for additional quantity

Worldrigs ID: WR715
Dill Pipe Package:

19 - DRILL COLLAR 4 3/4" of 47 LBS/FT CONECTION 3 1/2 IF (NC-38) RANGO 2 PREMIUM 
1 - DRILL COLLAR 4 3/4" of  47 LBS/FT CONECTION  (NC-35) RANGO 2  PREMIUM
8 - DRILL COLLAR HELICOIDAL 6 1/2" of 91 LBS/FT  CONECTION 4 IF (NC-46) RANGO 2 PREMIUM
1 - DRILL COLLAR LISO HELICOIDAL  6 1/2"  of  91 LBS/FT  CONECTION 4 IF (NC-46) RANGO 2 PREMIUM
5 - DRILL PIPE DE 4 1/2" GRADE  E-75 of 16.60 LBS/FT  CONECTION 4 IF ( NC-46) RANGO 2 PREMIUM
15 - DRILL PIPE 4 1/2" GRADE  X -95  of  16.60 LBS/FT CONECTION 4 IF ( NC-46) RANGO 2 PREMIUM
18 - DRILL PIPE  4 1/2" GRADE  G -105  of  16.60 LBS/FT CONECTION 4 IF ( NC-46) RANGO 2 PREMIUM
1 - DRILL PIPE 4 1/2" GRADE  S-135  of  16.60 LBS/FT CONETION  4 IF ( NC-46) RANGO 2 PREMIUM
54 - DRILL PIPE 5" GRADE  X-95  of  25.60 LBS/FT CONECTION  4 1/2 IF (NC-50) RANGO 2 PREMIUM
62 - DRILL PIPE 5" GRADE  G-105  of  19.50 LBS/FT CONECTION  4 1/2 IF (NC-50) RANGO 2 PREMIUM
9 - HEAVY WEIGHT ESTÁNDAR  5"  of  49.3 LBS/FT CONECTION  4 1/2 IF (NC-50) RANGO 2 PREMIUM
5 - HEAVY WEIGHT HELICOIDAL 5" of  E 49.3 LBS/FT CONECTION 4 1/2IF (NC-50) RANGO 2 PREMIUM
7 - HEAVY WEIGHT ESTÁNDAR  3 1/2 "  of  25.3 LBS/FT  CONECTION  3 1/2 IF (NC-38)RANGO 2 PREMIUM
2 - HEAVY WEIGHT DE 3 1/2 " HELICOIDAL of 25.3 LBS/FT CONECTION 3 1/2 IF (NC-38)RANGO 2 PREMIUM
16 - HEAVY WEIGHT  4"  of  29.90 LBS/FT CONECTION 4F (NC-40) RANGO 2 PREMIUM
9 - DRILL PIPE 3 1/ 2" GRADE  X-95  of  15.50 LBS/FT CONECTION 3 1/2 IF (NC-38) RANGO 2 PREMIUM
35 - DRILL PIPE 3 1/2 " GRADE  E-75 of  15.50 LBS/FT CONECTION  3 1/2 IF (NC-38) RANGO 2 PREMIUM
14 - DRILL PIPE 3 1/2 " GRADE G- 105  of  15.50 LBS/FT CONECTION 3 1/2 IF (NC-38) RANGO 2 PREMIUM
5 - DRILL PIPE 3 1/2 " GRADE  G-105  of  13.30 LBS/FT CONECTION 3 1/2 IF (NC-38) RANGO 2 PREMIUM
5 - DRILL PIPE 3 1/2" GRADE X-95 of  13.30 LBS/FT CONECTION 3 1/2 IF (NC-38) RANGO 2 PREMIUM
25 - DRILL PIPE 4" GRADE  S - 135  of  14.00 LBS/FT CONECTION 4FH (NC-40) RANGO 2 PREMIUM
55 - DRILL PIPE 4" GRADE  G-105  of 15.70 LBS/FT CONECTION DS-40 RANGO 2 PREMIUM
16 - HEAVY WEIGTH ESTANDAR 3 1/2" of  23.50 LBS/FT CONECTION  3 1/2 IF RANGO 2 SECOND CLASS
24 - DRILL PIPE 5" GRADO G-105  of  19.50LBS/FT CONECTION  4 1/2 IF (NC-50) RANGO 2 SECOND CLASS
22 - DRILL PIPE 5" GRADO X-95  of  25.60 LBS/FT CONECTION  4 1/2 IF (NC-50) RANGO 2  SECOND CLASS
1 - DRILL PIPE 4 1/2 " GRADE X-95  of  16.60 LBS/FT CONECTION 4 IF (NC- 46)RANGO 2 SECOND CLASS
16 - DRILL PIPE 4 1/2 " GRADO G -105 of  16.60 LBS/FT CONECTION 4 IF (NC- 46)RANGO 2 SECOND CLASS
4 - DRILL PIPE 3 1/2 " GRADE G -105 of  16 LBS/FT CONECTION  3 1/2 IF (NC- 38)RANGO 2 SECOND CLASS
Other items available as well: Tubos Ancla of 9 5/8", Tubos Ancla of 7", Casing of 9 5/8", Drill Collar Espiral of 6 1/2" of 92 lbs/ft, Drill Collar Liso of 6 1/2 of 92 lbs/ft, Drill Collar Liso of 6 1/2 of 92 lbs/ft, Drill Collar Liso of 6 1/2 of 92 lbs/ft, Drill Collar Liso of 6 1/2 of 92 lbs/ft, Drill Pipe 2 7/8" of 6.85 LBS / FT CONECTION IF (NC 31) GRADE G105 RANGO 2 PREMIUM, LINKS 132" CAPACITY  350 TONS (Varco BJ), LINKS  DE 186" CAPACITY  750 TONS (Varco BJ)

Worldrigs ID: WR1091
Description :

Working Height 28.21 m
Working Outreach 23.51 m
Swing (Continuous) 360°
Platform Capacity – Unrestricted 230 kg
Platform Rotator (Hydraulic) 180°
Jib – Overall Length 1.83 m
Jib - Range of articulation 130° (+70°/-60°)
Platform Size 0.91 m x 2.44 m
Overall Width 2.49 m
Tailswing (working condition) 1.42 m
Stowed Height 3.05 m
Stowed Length 12.19 m
Wheelbase 3.05 m
Ground Clearance 0.30 m
Machine weight 1/2 17,200 kg
Max Ground Bearing Pressure 2 6.5 kg/cm2
Drive Speed 4WD 5.6 km/h
Gradeability 4WD 45%
Axle Oscillation 0.20 m
Turning Radius – Inside 3.81 m
Turning Radius – Outside 6.02 m
With padeyes for lifting or tie down
0.91 m x 2.44 m low mount platform
Selectable creep speed on drive / lift and swing functions
1.83 m articulating jib
180 degree powered platform rotator
Four wheel drive
Weight 17.200 kg
Tyres 18 – 625 Foam filled

Worldrigs ID: WR904
Description :

Model : 6027ACw/SLC5/05
Brand : CANRIG

Technical Parameter
Rated lifting capacity : 275T
Electric motor : 600HP AC（2x300HP)
Working pressure : 5000 Psi
Continuous rated torque : 30000 LB ft
Maximum speed level : 225 RPM

Worldrigs ID: WR737
Description

Cameron 18 3/4" DL AnnularElement, 10K
Dimensions: 1.1 x 1.1 x 0.5
Weight: 1 Te

Worldrigs ID: WR720
Description

2006 Gardner-Denver PZ9 (PZJ) Triplex Mud Pump
Caterpillar 3508 diesel engine
Mission 5" x 6" Centrifugal Charge Pump
Pulsation Dampener
Dimensions: 28’2”L x 11’7” W x 10’8” H & Weight 80,000 lbs

Worldrigs ID: WR716
Description

New/Unused - Driltech Style (25'x5"x3-1/2" API) Drill Pipe
Regular
9 pipes

Worldrigs ID: WR750
Description

2006 Hurricane 6T-276-42B/2000 Air Booster
CAT 3126 Diesel Engine
1,083 Hours on Meter

Worldrigs ID: WR1067
Description :

Worldrigs ID: WR436

Description

GE Oil and Gas Diverter Assembly.
KFDS 500 Psi MWP.
49 1/2" Rotary Table.
Assy No 06363801-1H803.
SN 0000416873-1.
YOM March 2015

Measurements

Dimensions 3.0 x 1.5 x 1.8

Weight 12 Te

 

Worldrigs ID: WR973
Description :

A wide range of baskets for many purposes:
Subsea baskets  
Equipment baskets  
Personnel baskets  
Garbage baskets

Worldrigs ID: WR386

Description
4 x BOP Fail Safe Valves

Worldrigs ID: WR892
Description :

Technical Parameter
Model : 60Hz
Output Power : 995KW
Maximum Speed : 1200 rpm
Manufacturer : CAT
Quantity : 19 sets
Manufacturing Date : 2017

Worldrigs ID: WR1059

Description :

Hooks with capacity 1 – 400 Ton for cranes, winches, hoists, ROV operations, etc.

Worldrigs ID: WR1124
Turnpoints for subsea use to redirect pipes, cables and similar.

Worldrigs ID: WR725
Description

Rongsheng Machinery F-1000 Triplex Mud Pump
Powered by a CAT 3508 Diesel Engine - 1,000 HP
Forged Steel Fluid End
RS Pulsation Dampner
SPD 5 x 6 Charge Pump
Size x Stroke - 6 3/4 x 10
Chain Drive Assembly
Master Skidded
Bill of Sale Only

Worldrigs ID: WR988
Description :

2007 Beretta T46 Track Drill
Deutz Diesel Engine (newer injectors)
Hour Meter Show 3,975.5
11 ft. 4" of Head Stroke
A Very Versatile Machine
Weight is 9,921 LBS
Tooling Included:
100 ft of 5-1/2" Casing Pipe
11 of 10ft NWJ Drill Rods, 2-1/2" O.D.

Worldrigs ID: WR976
Description :

Double bollards 98 Ton MBL for deck installation.
Finish : Sand Blast and Primar
MBL : 98t

Worldrigs ID: WR979
Description :

A wide range of surface and subsea buoyancy modules:
13 kg to 25 kg spherical subsea buoys
120 and 250 kg buoyancy modules.
1200, 2400 and 3500 kg buoyancy modules.
14000 kg surface buoys
Subsea buoys up to 10 ton @ 500 MWS.

Worldrigs ID: WR748
(1) Ingersoll-Rand HR2.5 1250 cfm / 350 psi Air Compressor

(1) CAT 3412 E-TA V-12 Diesel Engine, twin turbo-charged diesel engine (rated 750 HP @ 1800 RPM)
Volume Output: 1250 scfm @ 1700 psig  or  1450 scfm @ 600 psig
(Air-X-Changers is a Harsco Industrail company)Model: 93AH Big Cooler / Radiator (set up for extreme & hot weather conditions)
Mounted on a 2 axle Trailer (heady duty with double frame) with tow hitch - VIN: 1M9DH3327VA211128 - Price: $5,000
Air Comp - S/N: 4CR00524
Dimensions & Weight: 33' L x 8-1/2" W x 13'3" H and around 45,000 lbs
Package Price: $38,000 USD ("as is")
Note: We can offer to part out the IR air compressor, CAT diesel engine, Radiator, and Trailer to sell them individually.
Sold & Removed: - (1) Ariel 1400 psi Air Booster - 2 Stage Air Booster (Screw Type) High Pressure & Volume with Air, Mist, Foam, and Aerated-Mud Drilling, Screw: CF246G Single-Stage, Booster: Cylinder 1: 6" bore, Cylinder 2" 3.625" bore

Worldrigs ID: WR1099
Description :

Flygt Xylem electric seawater pumps
Model 2660.181
Max flow 115 m3/hour
Max lifting height 55 meter
440 – 690 Volt 50 hz, 5.6 kW
Weight 78 kg

Flygt Xylem electric seawater pumps
Model 2201.012
Max flow 234 m3/hour
Max lifting height 90 meter
440 – 690 Volt 50 hz, 37 kW
Weight 240 kg

Yamada airdriven pumps
Max flow 600 liter/min
Max lifting height 60 meter
Air pressure from 1.4 to 7 bar
Air consumption 4 m3/min @ 5 Bar
Weight 70 kg

Worldrigs ID: WR1026

Description :
Principal Particulars :
Maker : NOV/Am-Clyde
Model : ATL-60
Build : 2012
Class : DNV incl. man riding
Crane Voltage : 690V, Crane equipped with 6,6KV transformers

Crane Capacities :
Capacity Main : 1200t@14-31m, 600t@50m, 250t@70m
Capacity Aux : 500t@20.3-60m,120t@100m
Capacity Whip : 50t@22.9-113.4m
Man-riding Capacity : 5 ton all radii
Boom Length (from center line of boom foot pin) :
Length to main fall upper block sheaves : 85.5m
Length to auxiliary fall upper block sheaves : 107.0m
Length to whip fall jib tip sheaves : 115.0m
Operating Radius :
Main fall : 18.0-91.0m
Auxiliary fall : 20.0-105.0m
whip fall : 22.55-113.41m

Whinches :
Main hoist winch : 66.8MT single linepull at 64m/min,4x186KW
Aux hoist winch : 68.7MT single linepull at 62m/min,4x186KW
Whip hoist winch : 27.5MT single linepull at 158m/min,4x186KW
Boom hoist winch : 2.3MT single linepull at 26-61m/min,3x186KW
Swing drives : 6x149KW, Swing speed 0,3RPM
Tugger winches,4xload control : 25MT single line at 16m/min,75KW each

Location : Netherlands

Worldrigs ID: WR1048
Various cranes for installation on vessels or quay

Worldrigs ID: WR1107
Description :

We provide comprehensive spooling services of wire-rope, cable,
fiber rope or similar. Spooling machines in different sizes combined
with trained and experienced personnel can handle wire rope and
umbilical up to 250 ton drum weight.

Spooling services deliver accurate and efficient spooling results,
up to a maximum of 30 ton back tension, reducing the likelihood of
problems with incorrectly spooled wire-rope on winches.

Our equipment fits onto lorry, and can be set up at your preferred
location worldwide, or at one of our bases in Norway.

Also available : Atex approved machines for use in Atex zone 2.

Remote operated spooling machine, with separate wire guide for spooling
onto cable drums. Powered by diesel HPU, installed in separate 20ft container.
The spooling machines operating speed is max 5 rotation /min. when
spooling in and max 10 rotations/min when spooling out.

Worldrigs ID: WR709
Description

Make Cameron, Model No LDO, 10,000 PSI. Assy No 235535-05,
Serial No CP 1138210-10Weight 2460kg, Vent Bore 10",
Top Flange 11", Bottom Flange 11", Ram 7 5/8".

Worldrigs ID: WR1052
Description :

Some of our fenders listed below:
Yokohama type Air fenders Length 4.0m ø2.5m, weight 1000 kg inclusive tyre net
Yokohama type Air fenders Length 4.5m ø2.5m, weight 1200 kg inclusive tyre net
Yokohama type Air fenders Length 5.0m ø2.9m, weight 1400kg inclusive tyre net

Worldrigs ID: WR392

Description :

Snatch blocks,
Fixed blocks,
Hook blocks with capacity up to 200 ton

Worldrigs ID: WR1045
Description :

Please send us an email to mail@worldoils.com for more details.

Worldrigs ID: WR710
Description

2 x Shaffer Bonnets 10K

Worldrigs ID: WR1008
Description :

2008 Boart Longyear - DeltaBase 430 (Angle Package) drill rig
Rotary Head HY79 – Upgraded in 2013
Side Shift and Tip out head, 16 feet stroke, mast 20-22
Angle Package - 90 degrees (Mast Turns Left & Right also)
3L6 Monoyo Pump (installed in 2018)
Wireline & Pull Master winch
Sandline with 500 ft of 3/16" cable line
15,400 lbs of Pullback
Dual Break out wrenches on the drill
Mounted on a Crawler Unit on metal tracks
Deutz 4 cylinder 140HP Diesel Engine
Hydraulic lift Rod Rack

Location : USA

Worldrigs ID: WR1130
Description :

We have a wide range of clump weights up to 900 Tonne per unit.
The weights have a space saving design and are used for testing of 
cranes, winches or other equipment or as a fixed point on sea bed.

Worldrigs ID: WR723
Description

IDECO T-1000 Triplex Mud Pump
7" x 10" liners with FSFE
Bull Wheel
Skid Mounted
Dimensions: 14' x 8' 6" x 9' and weight 35,000 LBS
Note: No Engine installed, but a 1000-1200 HP diesel engine can be installed at an extra cost to make it complete

Worldrigs ID: WR433

Description
Drill-Quip DX Wellhead Connector 18 3/4" 15K
PN 2-600862-02. SN 400037545-01.
CX-18 Inconel 625 Ring groove X Dril-Quip Profile
Connection Down X 18 3/4" - 15K Studded Flange Up.

Measurements
Dimensions : 1.5 x 1.5 x 1.6
Weight : 12 Te

Worldrigs ID: WR1113
Description :

Swivels Suitable for frequent rotation under load, capacity up to 250 ton

Worldrigs ID: WR1060
Electric and diesel driven hydraulic power packs for operation of winches, pumps, etc.

Worldrigs ID: WR1006
Description :

Chutes for guiding of wire, rope or umbilical from vessel to sea

Worldrigs ID: WR746
Description

1997 AirComp - 2 Stage Air Compressor & Booster Combo Unit #3
(1) Ingersoll-Rand 1250 cfm / 350 psi Air Compressor
(1) Ariel 1400 psi Air Booster (new valves)
2 Stage Air Booster (Screw Type) High Pressure & Volume
Air, Mist, Foam, and Aerated-Mud Drilling
Screw: CF246G Single-Stage
Booster: Cylinder 1: 6" bore, Cylinder 2" 3.625" bore
CAT 3412 E-TA V-12 Diesel Engine, twin turbo-charged diesel engine (rated 750 HP @ 1800 RPM)
Volume Output: 1250 scfm @ 1700 psig  or  1450 scfm @ 600 psig
(Air-X-Changers is a Harsco Industrail company)Model: 93AH Big Cooler / Radiator (set up for extreme & hot weather conditions)
Safety Shutdown
Has all new wires
Mounted on a 2 axle Trailer (heady duty with double frame) with tow hitch
Dimensions & Weight: 33' L x 8-1/2" W x 13'3" H and around 47,000 lbs
Repairs & Services are finished - unit is ready for work!

Worldrigs ID: WR434

Description
Flange x Hub, in cert to Feb 2019. Serial Number SPH 3222

Measurements
Dimensions : 1.7 x 1.7 x 1.8

Worldrigs ID: WR389

Description
Reservoir & Control Panel Constructed from 316L Stainless Steel
2250 Litre Capacity
Reservoir complete with internal separation baffles
Complete with 3 x motor/pump sets

Rexroth A11V190 pumps 190cc
Motors 110KW
Each pump has a maximum delivery of 277 1/min
Ambient Op Range -20 to +40 degrees C. POA

Worldrigs ID: WR444
Description
Choke and Kill Manifold 3 1/16" - 15K x 4 1/16" - 10K

Worldrigs ID: WR1112

Description :

Four-wheel drive Under Rollers are designed for ease of handling and
maneuvering reels up to 350Te capacity. suitable for reels up to
11.2m diameter and variable width.

Under Rollers are supplied with diesel or electric hydraulic power
packs and can be manually or digitally controlled.

Also self-loading versions available complete with cradles to avoid the
need for a crane to load/unload reel.

Crane loaded under roller description :
Consist of four powered rollers in carriage which rest on two sets
of bed beams. Bed beams are lifted into position with forklift and
spacer tubes are bolted between beds. Reel is lifted onto rollers
with crane.

Loading is possible both directions, Powered wheels comes with
hydraulic and mechanical brakes for both directions.

Data for 350 Ton capacity crane loaded under roller :
Drive force at rim per powered roller 2.6 – 3.4 Ton
Max rim speed with 110 l/min HPU 15 – 20 m/min
Max reel weight 350 Ton
Flange width Up to 240 mm
Hydraulic pressure 210 bar
Weight each carriage 3500 kg (two off)

Worldrigs ID: WR726
Gardner Denver 5 x 8  Duplex Mud Pump
Maximum BHP
    Mud Service: 52 (39 kw)
    Ind’l. Service: 73 (54 kw)
Maximum Jackshaft RPMNo. of Pistons: 2
    Mud Service: 330
    Ind’l. Service: 471
Stroke Length: 8 in. (203 mm)
Piston Rod Load: 8,036 lbs. (3,645 kg)
Oil Capacity: 12 gal. (46 liters)
Pump Weight: 4,930 lbs. (2,236 kg)
Normal Operation:164 GPM / 621 LPM | Max Pump RPM: 63
Maximum Recommended Operation: 260 GPM / 984 LPM | Max Pump RPM: 100
Powered by Detroit 471 Diesel Engine
Mounted on a Tri-Axle Trailer with a Pintle Hitch

Worldrigs ID: WR971

Worldrigs ID: WR397

Description
All flanged and in ticket to 2018

Measurements
Dimensions :
1) 1.4 x 1.55 x 2.15H, 2-3) 1.4 x 1.4 x 1.9H, 4-12)1.4 x 1.9 x .8 H

Weight :
1)17, 2&3)12 each, 4-12)4 each