D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale, Flush By Units for Sale, World-rigs.com

Cannot find the rig you want? Email us on

Do you need a rig on lease? Email us on

D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale


Name :	D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale

ID :	WR371

Price :	Inquire for pricing

Specifications :	D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale Slant Rigs for Sale Geothermal Hydraulic Drilling Rig - For Sale D40S Water Well and Geothermal Hydraulic Drilling Rig Specifications Pull up : 88῾302 lb Pull down : 44῾150 lb Stroke : 28 ¼’ Drilling torque : 20῾650 ft-lb 0÷180 rpm Coring torque : 3῾320 ft-lb @ max 800 rpm Speed up/down : 2,3 ft/s Service jib crane : 22῾075 lb Mud pump : 7 1/2” X 7” duplex double acting Centrifugal pump : 792 gal 42÷72 psi Foam pump : 60 GPM 1210 psi Double vice : 20 ½” Make up and break out :59῾000 ft-lb Stroke : 27 ½” Diesel engine : 440 kW @ 1800 rpm Drill pipe feeder : 3 ½”÷8” Drilling : Direct circulation - coring Dimensions : 8,20’x 42,65’x 13,94’ (h) Weight : 101῾412 lb Description D40 Hydraulic Driling Rig Truck mounted on Astra 8 x 4 Pull up 40 metric tons - Truck Astra HD8 Model 84.44 (heavy duty) 8x4, Euro 5 - Mast Lattice Type for D.P. and D.C. 6mt long Maximum static hook load : 40 metric ton (44 short ton) Maximum pull down : 20 metric ton (22 short ton) Top drive stroke : 8,6 m. - Slant device that permit to drill from 0-45 degree with Hydraulic Stops 5 degree by 5 degree - Automatic drill pipe and drill collar handling system Suitable to catch drill pipes and drill collars diameters 2 ⅜” -8” with control valve for force regulation. - Semi automatic Pipe Rack - Pull up and down system composed by hydraulic block distributor with valves, hydraulically controlled to action the main cylinder. - Hydraulic power Tong at double body, suitable to screw and unscrew DP, DC and CSG.suitable to catch D.P. from 2 ⅜” to CSG max 20”, full opening passage 20.1/2”.( 520 mm). Maximum make : up 6200 kgm Maximum brake : out 8000 kgm - Top drive Standard Drilling • Maximum torque 2.800 daNm at 50 RPM (20.282 ft/lb) • Maximum torque 778 daNm at 180 RPM (5.633 ft/lb) • RPM from 0 to 180 Coring Drilling • Maximum torque 448 daNm at 362 RPM (3239 ft/lb) • Maximum torque 202 daNm at 800 RPM (1460 ft/lb) • RPM from 0 to 800 • Stroke 8,6 m ( 52,5 ft) • Pull up 40 metric tons ( 44 short ton ) • Pull down 20 metric tons ( 22 short ton ) • Maximum speed up 1 m/sec • Maximum speed down 1 m/sec - Service jib crane With telescopic arm extension minimum 1.5 mt Maximum load capacity 10 tons Running speed up and down 0,5 m/s Rope ø 13 mm - Crown block : Complete of 2 sheaves for wire rope ø 13 mm mounted on bearings - Travelling block : For 10 Tons capacity and one sheave with dead line on travelling block - N°4 Stabilizers - Hydraulic power unit : mounted on rig deck composed of : Nr.1 Diesel engine industrial type, Deutz TCD 16.0 V08 Tier IV or TCD 2015 V08 4V Tier III - Sound proof hood (max 80 DB ) - Manifold for mud-air discharge max 80 Bar - Hydraulic system : composed of pumps and hydraulic motors, pipes and hoses, blocks, distributors, valves, hydraulic cylinders and fitting. - 7.1/2” X 7” Duplex double acting mud pump Performance : @120 stroke/min Max discharge : 2376 l/min with 37 BAR liner 7.1/2” Max pressure : 70 BAR with 1252 l/min liners 5.1/2” Power input : 217 Hp Complete of Hydraulic motor joint for connection hydraulic motor to pump and flex hoses - Centrifugal Pump : 3000 litres , 3-5 Bar with hydraulic motor - Foam pump : Triplex CAT mod. 6671 (or equivalent), driven by hydraulic motor, - wireline winch : Hydraulically operated , Max drum capability 2.000 Mt cable (9000 feet) Suitable for wire ø ¼” max. Max Speed 4mt/sec Max pull 1400 daNm - Control panel, mounted on drill floor on rear position left side near to centre well, - Electric system EEx-d - Diesel Electric Generator Unit - Tool box complete of standard tools for maintenance and positioned on main frame

WorldRigs has D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale

	Images

D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale
Slant Rigs for Sale
Geothermal Hydraulic Drilling Rig - For Sale
D40S Water Well and Geothermal Hydraulic Drilling Rig

Mail WorldRigs

Mail WorldRigs regarding any general/sale enquiries or feedback.

You are enquiring about : D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale, ID 371

Your name :

Your company :

Your email :

Your contact number :

Your message :

Please enter the security code

...............................................................................

Cannot find the rig you want? Email us on

Do you need a rig on lease? Email us on

D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale


Name :	D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale

ID :	WR371

Price :	Inquire for pricing

Specifications :	D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale Slant Rigs for Sale Geothermal Hydraulic Drilling Rig - For Sale D40S Water Well and Geothermal Hydraulic Drilling Rig Specifications Pull up : 88῾302 lb Pull down : 44῾150 lb Stroke : 28 ¼’ Drilling torque : 20῾650 ft-lb 0÷180 rpm Coring torque : 3῾320 ft-lb @ max 800 rpm Speed up/down : 2,3 ft/s Service jib crane : 22῾075 lb Mud pump : 7 1/2” X 7” duplex double acting Centrifugal pump : 792 gal 42÷72 psi Foam pump : 60 GPM 1210 psi Double vice : 20 ½” Make up and break out :59῾000 ft-lb Stroke : 27 ½” Diesel engine : 440 kW @ 1800 rpm Drill pipe feeder : 3 ½”÷8” Drilling : Direct circulation - coring Dimensions : 8,20’x 42,65’x 13,94’ (h) Weight : 101῾412 lb Description D40 Hydraulic Driling Rig Truck mounted on Astra 8 x 4 Pull up 40 metric tons - Truck Astra HD8 Model 84.44 (heavy duty) 8x4, Euro 5 - Mast Lattice Type for D.P. and D.C. 6mt long Maximum static hook load : 40 metric ton (44 short ton) Maximum pull down : 20 metric ton (22 short ton) Top drive stroke : 8,6 m. - Slant device that permit to drill from 0-45 degree with Hydraulic Stops 5 degree by 5 degree - Automatic drill pipe and drill collar handling system Suitable to catch drill pipes and drill collars diameters 2 ⅜” -8” with control valve for force regulation. - Semi automatic Pipe Rack - Pull up and down system composed by hydraulic block distributor with valves, hydraulically controlled to action the main cylinder. - Hydraulic power Tong at double body, suitable to screw and unscrew DP, DC and CSG.suitable to catch D.P. from 2 ⅜” to CSG max 20”, full opening passage 20.1/2”.( 520 mm). Maximum make : up 6200 kgm Maximum brake : out 8000 kgm - Top drive Standard Drilling • Maximum torque 2.800 daNm at 50 RPM (20.282 ft/lb) • Maximum torque 778 daNm at 180 RPM (5.633 ft/lb) • RPM from 0 to 180 Coring Drilling • Maximum torque 448 daNm at 362 RPM (3239 ft/lb) • Maximum torque 202 daNm at 800 RPM (1460 ft/lb) • RPM from 0 to 800 • Stroke 8,6 m ( 52,5 ft) • Pull up 40 metric tons ( 44 short ton ) • Pull down 20 metric tons ( 22 short ton ) • Maximum speed up 1 m/sec • Maximum speed down 1 m/sec - Service jib crane With telescopic arm extension minimum 1.5 mt Maximum load capacity 10 tons Running speed up and down 0,5 m/s Rope ø 13 mm - Crown block : Complete of 2 sheaves for wire rope ø 13 mm mounted on bearings - Travelling block : For 10 Tons capacity and one sheave with dead line on travelling block - N°4 Stabilizers - Hydraulic power unit : mounted on rig deck composed of : Nr.1 Diesel engine industrial type, Deutz TCD 16.0 V08 Tier IV or TCD 2015 V08 4V Tier III - Sound proof hood (max 80 DB ) - Manifold for mud-air discharge max 80 Bar - Hydraulic system : composed of pumps and hydraulic motors, pipes and hoses, blocks, distributors, valves, hydraulic cylinders and fitting. - 7.1/2” X 7” Duplex double acting mud pump Performance : @120 stroke/min Max discharge : 2376 l/min with 37 BAR liner 7.1/2” Max pressure : 70 BAR with 1252 l/min liners 5.1/2” Power input : 217 Hp Complete of Hydraulic motor joint for connection hydraulic motor to pump and flex hoses - Centrifugal Pump : 3000 litres , 3-5 Bar with hydraulic motor - Foam pump : Triplex CAT mod. 6671 (or equivalent), driven by hydraulic motor, - wireline winch : Hydraulically operated , Max drum capability 2.000 Mt cable (9000 feet) Suitable for wire ø ¼” max. Max Speed 4mt/sec Max pull 1400 daNm - Control panel, mounted on drill floor on rear position left side near to centre well, - Electric system EEx-d - Diesel Electric Generator Unit - Tool box complete of standard tools for maintenance and positioned on main frame

WorldRigs has D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale for Sale

	Images

D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale
Slant Rigs for Sale
Geothermal Hydraulic Drilling Rig - For Sale
D40S Water Well and Geothermal Hydraulic Drilling Rig

If you are interested in the featured equipment,
please contact us on email

or call +65 97768837.

...............................................................................

Cannot find the rig you want? Email us on

D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale


Name :	D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale

ID :	WR371

Price :	Inquire for pricing

Specifications :
D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale Slant Rigs for Sale Geothermal Hydraulic Drilling Rig - For Sale D40S Water Well and Geothermal Hydraulic Drilling Rig Specifications Pull up : 88῾302 lb Pull down : 44῾150 lb Stroke : 28 ¼’ Drilling torque : 20῾650 ft-lb 0÷180 rpm Coring torque : 3῾320 ft-lb @ max 800 rpm Speed up/down : 2,3 ft/s Service jib crane : 22῾075 lb Mud pump : 7 1/2” X 7” duplex double acting Centrifugal pump : 792 gal 42÷72 psi Foam pump : 60 GPM 1210 psi Double vice : 20 ½” Make up and break out :59῾000 ft-lb Stroke : 27 ½” Diesel engine : 440 kW @ 1800 rpm Drill pipe feeder : 3 ½”÷8” Drilling : Direct circulation - coring Dimensions : 8,20’x 42,65’x 13,94’ (h) Weight : 101῾412 lb Description D40 Hydraulic Driling Rig Truck mounted on Astra 8 x 4 Pull up 40 metric tons - Truck Astra HD8 Model 84.44 (heavy duty) 8x4, Euro 5 - Mast Lattice Type for D.P. and D.C. 6mt long Maximum static hook load : 40 metric ton (44 short ton) Maximum pull down : 20 metric ton (22 short ton) Top drive stroke : 8,6 m. - Slant device that permit to drill from 0-45 degree with Hydraulic Stops 5 degree by 5 degree - Automatic drill pipe and drill collar handling system Suitable to catch drill pipes and drill collars diameters 2 ⅜” -8” with control valve for force regulation. - Semi automatic Pipe Rack - Pull up and down system composed by hydraulic block distributor with valves, hydraulically controlled to action the main cylinder. - Hydraulic power Tong at double body, suitable to screw and unscrew DP, DC and CSG.suitable to catch D.P. from 2 ⅜” to CSG max 20”, full opening passage 20.1/2”.( 520 mm). Maximum make : up 6200 kgm Maximum brake : out 8000 kgm - Top drive Standard Drilling • Maximum torque 2.800 daNm at 50 RPM (20.282 ft/lb) • Maximum torque 778 daNm at 180 RPM (5.633 ft/lb) • RPM from 0 to 180 Coring Drilling • Maximum torque 448 daNm at 362 RPM (3239 ft/lb) • Maximum torque 202 daNm at 800 RPM (1460 ft/lb) • RPM from 0 to 800 • Stroke 8,6 m ( 52,5 ft) • Pull up 40 metric tons ( 44 short ton ) • Pull down 20 metric tons ( 22 short ton ) • Maximum speed up 1 m/sec • Maximum speed down 1 m/sec - Service jib crane With telescopic arm extension minimum 1.5 mt Maximum load capacity 10 tons Running speed up and down 0,5 m/s Rope ø 13 mm - Crown block : Complete of 2 sheaves for wire rope ø 13 mm mounted on bearings - Travelling block : For 10 Tons capacity and one sheave with dead line on travelling block - N°4 Stabilizers - Hydraulic power unit : mounted on rig deck composed of : Nr.1 Diesel engine industrial type, Deutz TCD 16.0 V08 Tier IV or TCD 2015 V08 4V Tier III - Sound proof hood (max 80 DB ) - Manifold for mud-air discharge max 80 Bar - Hydraulic system : composed of pumps and hydraulic motors, pipes and hoses, blocks, distributors, valves, hydraulic cylinders and fitting. - 7.1/2” X 7” Duplex double acting mud pump Performance : @120 stroke/min Max discharge : 2376 l/min with 37 BAR liner 7.1/2” Max pressure : 70 BAR with 1252 l/min liners 5.1/2” Power input : 217 Hp Complete of Hydraulic motor joint for connection hydraulic motor to pump and flex hoses - Centrifugal Pump : 3000 litres , 3-5 Bar with hydraulic motor - Foam pump : Triplex CAT mod. 6671 (or equivalent), driven by hydraulic motor, - wireline winch : Hydraulically operated , Max drum capability 2.000 Mt cable (9000 feet) Suitable for wire ø ¼” max. Max Speed 4mt/sec Max pull 1400 daNm - Control panel, mounted on drill floor on rear position left side near to centre well, - Electric system EEx-d - Diesel Electric Generator Unit - Tool box complete of standard tools for maintenance and positioned on main frame

WorldRigs has D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale for Sale

	Images

D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale
Slant Rigs for Sale
Geothermal Hydraulic Drilling Rig - For Sale
D40S Water Well and Geothermal Hydraulic Drilling Rig

Mail WorldRigs

Mail WorldRigs regarding any general/sale enquiries or feedback.

You are enquiring about : D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale, ID WR371

Your name :

Your company :

Your email :

Your contact number :

Your message :

Please enter the security code

...............................................................................


Home		Land Rigs

Water Well Rigs		Coiled Tubing Rigs

Offshore Rigs		Other Rigs & Equip.

Live Rig Monitoring		Contact Us

Download our App

Download for iOS		Download for Android