SOLD

Condition : Used
Manufacturer : Schramm
Status : Available
Model Year : 2013
Model No : T500XD Drill Rig

Description

2013 Schramm T500XD 1500HP Drilling Rig
Hours: 10,903
HP: 1500

Detailed Description:

Power Unit
(2) MTU 12V-2000 engines, 760 bhp (567 kw) @ 1,800 rpm with electric start
(2) Dual core, side by side cooling pacl‹age, 130”F (54.4“C) ambient rating
(2) 220 gallon (930 I) diesel fuel tanks
(2) Hydraulic pump systems, with each including (8) piston pumps and (1) gear type pump
(1) 1,000 gallon (3,785 I) hydraulic tank with (18) twin element filters

Sub-Base and Walking System
Floor Height: 22 ft. (6.7 in)
Clearance: 19 ft. (5.8 in) under table bushing Ground Pressure:
Dead Load: 26 psi (1.8 bar)
Live Load: 57 psi (3.9 bar)
Walking, mast down: 41 psi (2.8 bar)
A dedicated diesel engine, hydraulic pump and 750 gallon (2,839 I) hydraulic tank are
included with the system

Telemast System
Top Head Travel: 56 ft. (17.07 in)
Hook Load: 500,000 lbs. (227,227 kg) actual Hoist Speed (both Engines):
0-130,000 lbs. @ 136 fpm (0 - 58,967 kg @ 41m/min)
101,000 — 285,000 lbs. @ 106 fpm (45,813 — 129,274 kg @ 32 in/min)
266,000 — 305,000 lbs. @ 100 fpm (129,727 — 138,346 kg @ 30 in/min)
306,000 — 419,000 lbs. @ 76 fpm (138,799 — 190,055 kg @ 23 in/min)
420,000 — 500,000 lbs. @ 64 fpm (190,509 — 226,796 kg @ 20 in/min) Pulldown
Capacity: 80,000 lbs. (36,363 kg) Pulldown Speed: 0-180 fpm (0 — 55 in/min) loaded,
0-200 fpm (0 — 61 in/min) free head

Tilting Top Drive
Power: 950 bhp (708 kw) Rotation Speed: 0-140 RPM Rotation Torque: Up to
35,000 ft-lbs (47,454 N-in) Swivel: 3 inch (7.6 cm) cartridge style Fluid
Pressure Rating: 7,500 psi (345 bar)

Rig Floor
37.5 inch (0.95 in) false table adapter and a 27.5 inch (0.7 in) Master
Bushing 22 ft. (6.7 in) floor height
19 ft. (5.79 in) under table clearance

Hydraulic Roughneck
Clamping Range: 4.5 — 9.625 inches (11.43 — 24.45 cm) diameter Clamping
Force: Adjustable up to 61,500 lbs @ 3,000 psi (273 kn @ 208 bar) Make/Break
Torque: 60,000 ft-lbs @ 3,500 psi (81,349 N-in @ 241 bar)

Loadsafe XD Pipe Handling
Built-in holding clamps with variable capacity from 4 - 24 inches (10 — 61 cm)
allow for make-up or break-out of tool joints from the top drive spindle
Capacity: Range III Maximum Lift Capacity: 10,000 lbs. (4,536 kg) Average
Trip Time: 1,500+ f/h (457+ m/h )

Main Winch
Bare Drum Pull: 9,600 Ibf. (42.7 kN))
Bare Drum Line Speed: 150 fpm (46 in/min) Hydraulic jib boom swing and
extend

Standard Accessories
Water injection system, 35 gpm (132.4 Ipm) @ 1,000 psi (69 bar) DTH lubricator
up to 5 gph (19 lph) @ 1,000 psi (69 bar)
Air manifold for air drilling operations Air/mud fluid lines, 4 inch (10 cm) stand
pipe and traveling hose for 7,500 psi (345 bar) operation Explosion proof 240V
lighting for nighttime operation (customer supplied generators) BOP handling
system, carriage and trolley rated 40,000 lbs. (18,144 kg)

Support Equipment
40’ Conex BoX: with spare parts for Rig

Drill Pipe:
5" OD (19.5 ppf) Grade S-135 / Range 3 (15,500') NCSO box and pin
connections (6 5/8" OD) with hardbanding

BOP Equipment:
Annular — Cameron type-84 13 5/8 (5,000psi) Ser#112938750-01 Double Ram —
Cameron type-U 13 5/8 (10,000psi) Ser#112934297-01 VBR Ram —
Cameron type-U 13 5/8 (10,000psi)
Ser#112912633-01 Choke Manifold — Cameron 4 1/16 (10,000psi)

Trip Tank:
Fabricated skid mounted tank with (40 bbl. of capacity) 4 x 3 centrifugal pump

Volume Pit:
Fabricated skid mounted tank with roof and 4 Agitators (350 bbl. Capacity)
Class 1 Div 1 lighting

Mud Pumps:
(2) 2012 - WHITE STAR QUATRO 1000HP MUD PUMP (can be substituted
if preferred, as we do have other options as well)

Pump
Fully fabricated precision frame with runners on a quadraplex oilfield skid.
Precision machined cast alloy steel crossheads Precision crossheads guides
with nylatron inserts or bronze Precision pinion and bull gear double helical Forged
fully assembled and balanced crankshaft
Spherical main and roller conrod bearings Single piece forged 7500psi dual
valve fluid modules with liner wear plate Two piece liner system liner with locking
nuts and splash guards High Grade polyurethane valves and seats.

Power
One, Detroit diesel 16V2000P EPA Tier 1, IMO compliant series 2000 16 cylinder,
four cycle water cooled, turbo charged, diesel engine rated 1072 continuous
BHP @1800 RPM Atex certified with spark arrester

L Shape Design
External gear reducer clutch engine supports on engine skid 2 brown and
sharp #4S lube pump c/w5/3 HP, 50/60HZ, 3 phase 240.480 190/380V Explosion
proof electric motor c/w Pre-Filter, pressure gauge and piping (or equivalent) for
external lubrication of all quarto bearings, crossheads, guides, etc. Cobra series
118 liner rinse pump c/w 2 HP 50/60 HZ 3-phase 240/480 190/380V marathon
explosion proof electric motor with installed circulation system or equal liner rinse
pump 2 HP 50/60 HZ 3-phase 240/480 190/380V electric motor c/w installed
circulation piping system External lubrication system c/w lube pump with
electric motor, 1.0hp, 21 60/50hz, 3 phase, 240/480 190/380V or equivalent,
strainer, oil-filter, pressure gauge, circulation system. White star standard 2 layers
of 2 part epoxy prime and 1 layer of 2 part epoxy top coating

SOLD

Condition : Used
Manufacturer : Schramm
Status : Available
Model Year : 2013
Model No : T500XD Drill Rig

Description

2013 Schramm T500XD 1500HP Drilling Rig
Hours: 10,903
HP: 1500

Detailed Description:

Power Unit
(2) MTU 12V-2000 engines, 760 bhp (567 kw) @ 1,800 rpm with electric start
(2) Dual core, side by side cooling pacl‹age, 130”F (54.4“C) ambient rating
(2) 220 gallon (930 I) diesel fuel tanks
(2) Hydraulic pump systems, with each including (8) piston pumps and (1) gear type pump
(1) 1,000 gallon (3,785 I) hydraulic tank with (18) twin element filters

Sub-Base and Walking System
Floor Height: 22 ft. (6.7 in)
Clearance: 19 ft. (5.8 in) under table bushing Ground Pressure:
Dead Load: 26 psi (1.8 bar)
Live Load: 57 psi (3.9 bar)
Walking, mast down: 41 psi (2.8 bar)
A dedicated diesel engine, hydraulic pump and 750 gallon (2,839 I) hydraulic tank are
included with the system

Telemast System
Top Head Travel: 56 ft. (17.07 in)
Hook Load: 500,000 lbs. (227,227 kg) actual Hoist Speed (both Engines):
0-130,000 lbs. @ 136 fpm (0 - 58,967 kg @ 41m/min)
101,000 — 285,000 lbs. @ 106 fpm (45,813 — 129,274 kg @ 32 in/min)
266,000 — 305,000 lbs. @ 100 fpm (129,727 — 138,346 kg @ 30 in/min)
306,000 — 419,000 lbs. @ 76 fpm (138,799 — 190,055 kg @ 23 in/min)
420,000 — 500,000 lbs. @ 64 fpm (190,509 — 226,796 kg @ 20 in/min) Pulldown
Capacity: 80,000 lbs. (36,363 kg) Pulldown Speed: 0-180 fpm (0 — 55 in/min) loaded,
0-200 fpm (0 — 61 in/min) free head

Tilting Top Drive
Power: 950 bhp (708 kw) Rotation Speed: 0-140 RPM Rotation Torque: Up to
35,000 ft-lbs (47,454 N-in) Swivel: 3 inch (7.6 cm) cartridge style Fluid
Pressure Rating: 7,500 psi (345 bar)

Rig Floor
37.5 inch (0.95 in) false table adapter and a 27.5 inch (0.7 in) Master
Bushing 22 ft. (6.7 in) floor height
19 ft. (5.79 in) under table clearance

Hydraulic Roughneck
Clamping Range: 4.5 — 9.625 inches (11.43 — 24.45 cm) diameter Clamping
Force: Adjustable up to 61,500 lbs @ 3,000 psi (273 kn @ 208 bar) Make/Break
Torque: 60,000 ft-lbs @ 3,500 psi (81,349 N-in @ 241 bar)

Loadsafe XD Pipe Handling
Built-in holding clamps with variable capacity from 4 - 24 inches (10 — 61 cm)
allow for make-up or break-out of tool joints from the top drive spindle
Capacity: Range III Maximum Lift Capacity: 10,000 lbs. (4,536 kg) Average
Trip Time: 1,500+ f/h (457+ m/h )

Main Winch
Bare Drum Pull: 9,600 Ibf. (42.7 kN))
Bare Drum Line Speed: 150 fpm (46 in/min) Hydraulic jib boom swing and
extend

Standard Accessories
Water injection system, 35 gpm (132.4 Ipm) @ 1,000 psi (69 bar) DTH lubricator
up to 5 gph (19 lph) @ 1,000 psi (69 bar)
Air manifold for air drilling operations Air/mud fluid lines, 4 inch (10 cm) stand
pipe and traveling hose for 7,500 psi (345 bar) operation Explosion proof 240V
lighting for nighttime operation (customer supplied generators) BOP handling
system, carriage and trolley rated 40,000 lbs. (18,144 kg)

Support Equipment
40’ Conex BoX: with spare parts for Rig

Drill Pipe:
5" OD (19.5 ppf) Grade S-135 / Range 3 (15,500') NCSO box and pin
connections (6 5/8" OD) with hardbanding

BOP Equipment:
Annular — Cameron type-84 13 5/8 (5,000psi) Ser#112938750-01 Double Ram —
Cameron type-U 13 5/8 (10,000psi) Ser#112934297-01 VBR Ram —
Cameron type-U 13 5/8 (10,000psi)
Ser#112912633-01 Choke Manifold — Cameron 4 1/16 (10,000psi)

Trip Tank:
Fabricated skid mounted tank with (40 bbl. of capacity) 4 x 3 centrifugal pump

Volume Pit:
Fabricated skid mounted tank with roof and 4 Agitators (350 bbl. Capacity)
Class 1 Div 1 lighting

Mud Pumps:
(2) 2012 - WHITE STAR QUATRO 1000HP MUD PUMP (can be substituted
if preferred, as we do have other options as well)

Pump
Fully fabricated precision frame with runners on a quadraplex oilfield skid.
Precision machined cast alloy steel crossheads Precision crossheads guides
with nylatron inserts or bronze Precision pinion and bull gear double helical Forged
fully assembled and balanced crankshaft
Spherical main and roller conrod bearings Single piece forged 7500psi dual
valve fluid modules with liner wear plate Two piece liner system liner with locking
nuts and splash guards High Grade polyurethane valves and seats.

Power
One, Detroit diesel 16V2000P EPA Tier 1, IMO compliant series 2000 16 cylinder,
four cycle water cooled, turbo charged, diesel engine rated 1072 continuous
BHP @1800 RPM Atex certified with spark arrester

L Shape Design
External gear reducer clutch engine supports on engine skid 2 brown and
sharp #4S lube pump c/w5/3 HP, 50/60HZ, 3 phase 240.480 190/380V Explosion
proof electric motor c/w Pre-Filter, pressure gauge and piping (or equivalent) for
external lubrication of all quarto bearings, crossheads, guides, etc. Cobra series
118 liner rinse pump c/w 2 HP 50/60 HZ 3-phase 240/480 190/380V marathon
explosion proof electric motor with installed circulation system or equal liner rinse
pump 2 HP 50/60 HZ 3-phase 240/480 190/380V electric motor c/w installed
circulation piping system External lubrication system c/w lube pump with
electric motor, 1.0hp, 21 60/50hz, 3 phase, 240/480 190/380V or equivalent,
strainer, oil-filter, pressure gauge, circulation system. White star standard 2 layers
of 2 part epoxy prime and 1 layer of 2 part epoxy top coating