| Specifications : |
International Flushby Unit for Sale
Used International Flush-by Unit for Sale
2013 built Flush By Unit for Sale
Specification
Truck : International
Rated single line pull winch : 25,000lb
Rated mast capacity (vertical) : 65,000lb
Rated mast capacity (slant) : N/A
Length (O/all) : 45'-10" 1/2" (13.983m)
Width (O/all) : 8'-6" (2.591m)
Wheel base : 304.5" (7.734m)
Height : 14'-3" (4.343)
Truck Specifications
Tandem steer tridem drive : Paystar 5900i
Engine :
International Maxxforce
Model A475
Displacement 12.4 litre
Transmission :
"Eaton Road Ranger"
18 speed manual
RTLOF-16918B
Mast Specifications
Load rating (Vertical) : 65,000lb
Load rating (Slant) : N/A
Mast height (from ground) : 76'-3" (23.241m)
Mast height (to underside of crown : 73'-2" (22.301m)
Crown (two sheave) : 2 x 24" diameter
Traveling Block Specifications
Model : C-TECH_FBB25T
Capacity : 25 ton
Grooving : 7/8" diameter
Drawworks
Model : CH-230
Motor : Rexroth
Capacity : 25,000#
Grooving 7/8"
Max. drum speed (at max. volume) : 250 rpm
Hydraulic Specifications
Usable tank capacity : 175 gal (800 litres)
Triple Vane Specifications :
Section 1 :
1100psi max wp
50gpm max flow
Section 2 :
2500psi max wp
31gpm max flow
Section 3 :
1500psi max wp
10gpm max flow
Pressure compension pump :
3000psi max wp
300gpm max flow
Gear pump :
2000psi max wp
27.97gpm max flow
Service Winch
Model : Braden Gearmatic
Capacity : 5,000# (bare drum) at max pressure
Wire rope dia. : 3/8" diameter
Speed : 183FPM (full drum at max pressure)
Tank Specifciations (Jasper)
Max. tank capacity : 8,120 litres
Material : Aluminum
Code : T406
Product : Oil / water / produced water
Design Pressure : 3.03psi mwap
Length (seam-seam) : 112"
Width (O/all) : 96"
Height : 73.5"
Pump Specifications
Model : TEEF 3 x 5
Horse Power (continuous) : 125hp
Horse Power (intermittent) : 165hp
Plunger : 3" Hardco
Max. pressure : 6220psi @ 50rpm
Max. flow rate : 138pm @ 300rpm
It has approximately 2500 working hours
|
